Short version of the Ram.
Short version of the Ram.
While assembling my initial PC, I made a simple mistake. Initially, everything was working fine, but once I inserted a screw into the MOBO, the system froze immediately. Now, when it starts up, the code displays “10” or “PEI CORE IS STARTED,” and a light signals an issue with the RAM. All systems activate but the boot remains unsuccessful. I tested each RAM module individually and changed their positions, yet the problem persisted. When I connected the RAM and powered it on, the indicators lit up. The main concern is whether I inadvertently shorted the RAM or if there’s a more serious fault.
It’s highly unlikely your motherboard will interfere with the motherboard itself while it’s operating, though there might be a serious issue at play.
It's incredible how consistently people find ways to act, even when basic common sense would advise against it. The mobo is definitely out of the picture.
You might have damaged the RAM or a connection port. Try reaching out to the store or manufacturer for a repair estimate. Alternatively, consider swapping it out. If you're very fortunate, your insurance could help offset this issue. Edited December 16, 2019 by LogicalDrm Some content removed
Relies on the bricking method. If RAM slots aren’t functional, it behaves similarly to missing RAM entirely—resulting in a RAM error at most. It might also act as a fail-safe. "No visible RAM slots, so avoid powering up." Updated Dec 16, 2019 by LogicalDrm Some content removed
It’s even more frustrating I realized I should have known better. A $500 error was a harsh lesson in its own right.
consider disconnecting everything and taking out the CMOS battery. Let it remain inactive for about an hour without power. It might be that a removable fuse was triggered, which some boards have; I removed all components for an hour and tried again (though this isn't guaranteed). This could be another factor worth investigating.