F5F Stay Refreshed Hardware Desktop Settings for my 3900x OC configuration

Settings for my 3900x OC configuration

Settings for my 3900x OC configuration

Pages (2): 1 2 Next
V
VMT6
Member
59
11-29-2019, 01:43 AM
#1
Hello, your system has a 3200MHz Corsair LX series RAM, a 3900X CPU, and an ASUS Taichi X570 motherboard. You've overclocked the CPU to 4.3 at 1.30 MHz. When testing with Cinebench AIDA64 it functions properly, but upon shutdown and power-on, your PC shuts down and restarts itself, resetting everything.
V
VMT6
11-29-2019, 01:43 AM #1

Hello, your system has a 3200MHz Corsair LX series RAM, a 3900X CPU, and an ASUS Taichi X570 motherboard. You've overclocked the CPU to 4.3 at 1.30 MHz. When testing with Cinebench AIDA64 it functions properly, but upon shutdown and power-on, your PC shuts down and restarts itself, resetting everything.

E
eryk123621
Member
66
11-29-2019, 02:02 AM
#2
Was es dir geholfen, etwas mehr Spannung zu verwenden?
E
eryk123621
11-29-2019, 02:02 AM #2

Was es dir geholfen, etwas mehr Spannung zu verwenden?

K
KindOfAKing
Member
228
11-29-2019, 11:31 PM
#3
Also tested 1.35 and 1.4.
K
KindOfAKing
11-29-2019, 11:31 PM #3

Also tested 1.35 and 1.4.

M
mentality_man
Member
123
12-05-2019, 05:31 PM
#4
No, I'm not using Ryzen Master or BIOS.
M
mentality_man
12-05-2019, 05:31 PM #4

No, I'm not using Ryzen Master or BIOS.

A
AvaDaLlamacorn
Junior Member
39
12-05-2019, 10:28 PM
#5
this and tbh, if you have to go to as high as 1.3V just to get 4.3GHz all core, its not worth it at all, you are better off with leaving the CPU at stock. Better spend the time overclocking the FCLK and DRAM and you will get much more performance out of your CPU.
A
AvaDaLlamacorn
12-05-2019, 10:28 PM #5

this and tbh, if you have to go to as high as 1.3V just to get 4.3GHz all core, its not worth it at all, you are better off with leaving the CPU at stock. Better spend the time overclocking the FCLK and DRAM and you will get much more performance out of your CPU.

Z
Zehky
Member
52
12-07-2019, 02:19 AM
#6
Bios
Z
Zehky
12-07-2019, 02:19 AM #6

Bios

N
NinaVanSteijn
Junior Member
44
12-07-2019, 06:13 AM
#7
The idle voltage of 1.5 is typical and usually not a concern unless you're optimizing for power savings.
N
NinaVanSteijn
12-07-2019, 06:13 AM #7

The idle voltage of 1.5 is typical and usually not a concern unless you're optimizing for power savings.

S
StreetHobo
Senior Member
568
12-17-2019, 04:07 AM
#8
It's acceptable if the voltage falls back into the 1.2-1.3V range during full operation
S
StreetHobo
12-17-2019, 04:07 AM #8

It's acceptable if the voltage falls back into the 1.2-1.3V range during full operation

L
Lukapop04
Member
216
12-17-2019, 09:02 AM
#9
L
Lukapop04
12-17-2019, 09:02 AM #9

A
Admiral_Nether
Junior Member
45
01-01-2020, 08:42 PM
#10
Ensure the system runs the newest BIOS, chipset drivers, and Ryzen Balanced Power Plan is active. Occasional 1.5v spikes are normal, but constant occurrences may indicate an issue. Test voltage under steady load and observe any significant drops.
A
Admiral_Nether
01-01-2020, 08:42 PM #10

Ensure the system runs the newest BIOS, chipset drivers, and Ryzen Balanced Power Plan is active. Occasional 1.5v spikes are normal, but constant occurrences may indicate an issue. Test voltage under steady load and observe any significant drops.

Pages (2): 1 2 Next