Setting up a wired network at home.
Setting up a wired network at home.
This setup seems straightforward, but it’s worth clarifying a few points. Since your connection comes directly via a Cat5e cable with an RJ45 port, you’re essentially using a standard Ethernet interface. You don’t need a separate modem unless you want to switch to a different type of service or add more devices. Your wireless router can still work alongside the wired connection for phones and tablets. Regarding wireless broadband, it’s not the same as DSL—it’s typically a different technology like Wi-Fi or cellular. Your setup looks solid if everything is properly configured.
Run additional wires from your router to the devices requiring them. The purpose of a router is to enable several systems to connect to a modem.
You're organizing to run multiple Ethernet cables throughout the home, around 12 or more.
It seems you're using a wireless internet service instead of a modem. Just connect the Ethernet cable from the PoE device to your router, then link it to your switch. Make sure the router is the primary device on the network.
Great point. I’m curious about why the router is prioritized and whether it could slow down the switch when handling many devices through it.
The router controls the network, assigning IP addresses to devices and acting as a firewall. Switches enable fast communication between gadgets. The connection from router to switch runs at 1Gb/s, significantly quicker than typical internet speeds—unless you're using a 1Gigabit WISP connection. You should be okay. I’ve connected my router to a 24-port switch; the internet drops before the link speed, but I’m happy to assist. Networking can be an enjoyable learning experience for beginners. Enjoy setting up your home network!
Sure, I'm glad to help. Just a quick note—my current speed is around 65Mbps down and 10Mbps up. Thanks for your support!