Setting up a high-performance CPU cooler from the aftermarket
Setting up a high-performance CPU cooler from the aftermarket
I recently purchased an Intel Core i7 4790 for my new PC, but it came with a stock cooler. I’m considering a similar product here: http://www.coolermaster.com/cooling/cpu-...yper-212x/. I have a few questions: Do I need to apply thermal paste before installing it? And if so, how should I apply it? Thanks.
Use thermal paste according to various techniques. No single method is ideal; you can apply it evenly by placing a small drop in the center and using a credit card or spreading it with a finger inside a plastic bag. Aim for a thin, consistent layer similar to a paint finish.
A more significant challenge is potentially replacing the backing plate on the motherboard's rear side. If you haven't installed the motherboard yet, this is simple. However, if it's already installed, you might need to remove the board to install the new backing plate.
Use thermal paste according to various techniques. No single method is ideal; you can apply it evenly by placing a small drop in the center and using a credit card or a finger in a plastic bag to spread it. The aim is to achieve a thin, consistent layer, similar to a paint finish.
A major challenge is potentially replacing the backing plate on the motherboard's back side. If you haven't installed the motherboard yet, this is easy. But if you've already installed it, you might need to remove the board to install the new backing plate.
The Hyper 212X includes thermal paste and application instructions. You can purchase higher-quality paste for better results. It should lower temperatures slightly, though the difference may not be noticeable. I don't OC or play around with it. Check some YouTube videos on applying thermal paste for more tips. Coolermaster might have a suitable option.
http://www.overclock.net/t/1322128/guide...m3-fm1-fm2
The hyper212 isn't the easiest cooler to install and can be a real pain at times to get right. So don't get frustrated if it's just not going your way, this is very common with that cooler.