Setting RAM to 1600

IHaveNoSkillz
Junior Member

05-09-2017, 06:51 AM

Hi,
I need assistance changing my motherboard to 1600mhz mode in BIOS. It seems I can't locate a suitable guide online.
Model: MSI 760GA-P43 (FX)
CPU: AMD FX 6300
Memory: Ballistix Tactical Low Profile 16GB Kit 8GBx2 DDR3-1600 1.35V UDIMM 240-Pin Memory Modules BLT2K8G3D1608ET3LX0

IHaveNoSkillz

05-09-2017, 06:51 AM #1

TMCMatthew
Junior Member

05-09-2017, 07:35 AM

DCP is located within the DRAM configuration in the BIOS.
Choose 1600 in the section.
https://www.google.com/search?q=MSI+760G...emory+docp

TMCMatthew

05-09-2017, 07:35 AM #2

DCP is located within the DRAM configuration in the BIOS.
Choose 1600 in the section.
https://www.google.com/search?q=MSI+760G...emory+docp

bellaaa_
Member

173

05-09-2017, 09:31 AM

Well, the device supports speeds up to 1600 and 1866 MHz, but it mentions that you might need to enable the XMP profile to achieve those rates. I think.
Regards

bellaaa_

05-09-2017, 09:31 AM #3

Well, the device supports speeds up to 1600 and 1866 MHz, but it mentions that you might need to enable the XMP profile to achieve those rates. I think.
Regards

JoJoMuffin
Member

05-09-2017, 03:59 PM

Are you sure about the speed of your memory? The typical standard is around 1600MHz. If you're unsure, run the command prompt and type wmic memorychip get speed.

JoJoMuffin

05-09-2017, 03:59 PM #4

Are you sure about the speed of your memory? The typical standard is around 1600MHz. If you're unsure, run the command prompt and type wmic memorychip get speed.

kingjuul
Junior Member

05-13-2017, 11:01 AM

SgtScream asks if the memory speed has been confirmed, noting 1600mhz is typical. They suggest checking with a command prompt to verify the actual speed.

kingjuul

05-13-2017, 11:01 AM #5

SgtScream asks if the memory speed has been confirmed, noting 1600mhz is typical. They suggest checking with a command prompt to verify the actual speed.

spurpin
Junior Member

05-14-2017, 02:50 AM

DCP is located within the DRAM configuration in the BIOS.
Choose 1600 in the section.
https://www.google.com/search?q=MSI+760G...emory+docp

spurpin

05-14-2017, 02:50 AM #6

DCP is located within the DRAM configuration in the BIOS.
Choose 1600 in the section.
https://www.google.com/search?q=MSI+760G...emory+docp