Set up your own router using a fiber optic connection.
Set up your own router using a fiber optic connection.
You're facing an issue where your ISP blocks bridge mode on the Huawei modem, preventing direct connection. People suggest two main approaches: either configure the Asus router as a regular access point or disable DHCP on your modem and place the Asus in a DMZ. Both aim to bypass the bridge restriction while maintaining network access.
Connect the Asus wireless router (WAN port) to the Huawei gateway using an Ethernet cable. Access the gateway's settings. Update the recognized devices list to assign a fixed MAC address to the gateway. This avoids disconnections during IP reassignments. Disabling DHCP on the gateway is optional but helpful. Turn off any wireless radios on the gateway if available. Use the Asus router as specified in the manual. Give it an IP address on a separate subnet, such as 192.168.1.1 while the gateway uses 192.168.0.1. Configure static DNS settings and set up your wireless network as usual. In this configuration, the Asus manages routing and wireless functions, allowing you to retain control while delegating modem tasks to the gateway.
Thanks for the response. I was thinking the same thing—I really hope the Asus RT-AX92U handles routing well with all its advanced features.
Fibrenest confirmed they don’t support bridging mode, making it unsuitable from their side. I considered replacing the HG8254Q2 with a custom unlocked version, but their latest notice says the GPON termination is linked to their ONT and can’t be used by other routers. Does that imply only their specific model works, or is there another factor involved?
It seems they mentioned something, but there might be regulations in your area that let users select their own hardware. ISP equipment works okay when focused on modem tasks, though it struggles with routing and wireless access point duties.