Set up the new GPU but encountering a black screen issue.
Set up the new GPU but encountering a black screen issue.
Hello, the setup is going through some issues. My friend provided me with a new GPU (1650 palit). Initially, I had a 1050ti GPU and after switching to safe mode and running DDU, I clicked the clean and shutdown option. When I installed the new GPU, I kept experiencing a black screen without any signal. I tried connecting the HDMI in and out, but when I reconnected it, a white light appeared on the monitor with no signal. After putting it back in, the light returned but still showed no signal. I also tried using the GPU without going through DDU, which didn’t work at all. Even my 1050ti is not functioning properly now.
Verify your GPU is seated properly in the PCI slot. Ensure a click sound when connecting and confirm all power connectors are fully inserted.
Check if CMOS can be cleared after changing cards. Also, confirm whether the 1650 chip requires external power.
Secure the GPU firmly to the motherboard, ensuring it stays in place and doesn<|pad|>. This might improve the connection. Even if it doesn’t function, keep it attached to avoid further issues. Also, verify the 1650 was operational prior to installation and test it on a different motherboard if needed.
The fix involved swapping the RAM somehow, but the RAM just stopped working. After installing the speaker and seeing error codes, I figured out the fix. Ty, it worked!