F5F Stay Refreshed Power Users Networks Set up port forwarding for your home game server to allow access from outside.

Set up port forwarding for your home game server to allow access from outside.

Set up port forwarding for your home game server to allow access from outside.

J
jorgen9
Member
Find
65
07-22-2016, 04:54 PM
#1
You're setting up your Rust server publicly by forwarding ports through two routers. The TCP ports you need are 28015–28016 and UDP ports 28015–28016. Your server is already assigned a static IP at 192.168.2.2, which should remain consistent. Make sure the Belkin router (192.168.1.1) forwards to your modem at 1.92.168.0.1 and that the second router (router #2) is set up to receive traffic from the first. Double-check the port numbers and ensure the correct subnet masks are configured for proper forwarding.
Reply
Reply
J
jorgen9
07-22-2016, 04:54 PM #1

You're setting up your Rust server publicly by forwarding ports through two routers. The TCP ports you need are 28015–28016 and UDP ports 28015–28016. Your server is already assigned a static IP at 192.168.2.2, which should remain consistent. Make sure the Belkin router (192.168.1.1) forwards to your modem at 1.92.168.0.1 and that the second router (router #2) is set up to receive traffic from the first. Double-check the port numbers and ensure the correct subnet masks are configured for proper forwarding.

Reply
Reply
S
silbo99
Junior Member
Find
3
08-01-2016, 06:48 AM
#2
You have dual nat because it's necessary for your design. A single large L2 wouldn't be practical or efficient.
Reply
Reply
S
silbo99
08-01-2016, 06:48 AM #2

You have dual nat because it's necessary for your design. A single large L2 wouldn't be practical or efficient.

Reply
Reply
F
fiestyninja
Member
Find
63
08-01-2016, 04:18 PM
#3
I don't understand what you're referring to, but it seems to function well in your environment.
Reply
Reply
F
fiestyninja
08-01-2016, 04:18 PM #3

I don't understand what you're referring to, but it seems to function well in your environment.

Reply
Reply
R
rgsingson
Junior Member
Find
14
08-01-2016, 05:07 PM
#4
You might have two routers for backup or redundancy. Running a second router as an access point can improve connectivity and coverage.
Reply
Reply
R
rgsingson
08-01-2016, 05:07 PM #4

You might have two routers for backup or redundancy. Running a second router as an access point can improve connectivity and coverage.

Reply
Reply
T
timo_1892
Senior Member
Find
715
08-03-2016, 10:23 AM
#5
Yes, double NAT can cause problems. Avoid it. Link the PC straight to the first router for a smoother connection.
Reply
Reply
T
timo_1892
08-03-2016, 10:23 AM #5

Yes, double NAT can cause problems. Avoid it. Link the PC straight to the first router for a smoother connection.

Reply
Reply
G
GarciaPRO
Member
Find
189
08-05-2016, 11:04 PM
#6
I hope the first router is still more than 50 feet away. I changed the Belkin into an access point, but I’m still facing issues with connecting or port forwarding back to the Rust question. What should I do next? How can I set up the port forwarding correctly?
Reply
Reply
G
GarciaPRO
08-05-2016, 11:04 PM #6

I hope the first router is still more than 50 feet away. I changed the Belkin into an access point, but I’m still facing issues with connecting or port forwarding back to the Rust question. What should I do next? How can I set up the port forwarding correctly?

Reply
Reply
K
KermitTheCrab
Member
Find
145
08-12-2016, 02:17 PM
#7
I pressed a button and it finally worked! Thanks a lot everyone! That was done!
Reply
Reply
K
KermitTheCrab
08-12-2016, 02:17 PM #7

I pressed a button and it finally worked! Thanks a lot everyone! That was done!

Reply
Reply