F5F Stay Refreshed Hardware Desktop Send the file but don't include BIOS

Send the file but don't include BIOS

Send the file but don't include BIOS

Pages (2): 1 2 Next
C
CoucouHiboux
Junior Member
23
12-07-2016, 06:55 PM
#1
Hello everyone, I am trying to use a motherboard I bought on eBay to put together a new PC. I can boot and it posts, but it requires me to hit f1 to run setup. However, when I hit f1, the screen goes black and a typing cursor appears. My first guess was that I installed the wrong generation of cpu for my BIOS version, so I swapped out the i7 3770 I was trying to use for an i5 2500k. The BIOS version listed in POST says it should support both the i7 and the i5. However, the problem persists. Below I will list the system specs and pictures of the events. MOBO: Asus p8h61-m lx2 on BIOS version 0601 CPU: i7 3770, i5 2500k GPU: MSI GeForce gt 710 Hdd: WD enterprise 1 tb Ram: 1xsamsung 4 gb ddr3 1333 Psu: thermaltake toughpower xt 775w, gamemax rgb 600 If I missed anything, please let me know. This is my first post.
C
CoucouHiboux
12-07-2016, 06:55 PM #1

Hello everyone, I am trying to use a motherboard I bought on eBay to put together a new PC. I can boot and it posts, but it requires me to hit f1 to run setup. However, when I hit f1, the screen goes black and a typing cursor appears. My first guess was that I installed the wrong generation of cpu for my BIOS version, so I swapped out the i7 3770 I was trying to use for an i5 2500k. The BIOS version listed in POST says it should support both the i7 and the i5. However, the problem persists. Below I will list the system specs and pictures of the events. MOBO: Asus p8h61-m lx2 on BIOS version 0601 CPU: i7 3770, i5 2500k GPU: MSI GeForce gt 710 Hdd: WD enterprise 1 tb Ram: 1xsamsung 4 gb ddr3 1333 Psu: thermaltake toughpower xt 775w, gamemax rgb 600 If I missed anything, please let me know. This is my first post.

N
Nejc007
Senior Member
707
12-09-2016, 04:37 PM
#2
The display indicates a PSU swap. Have you already replaced the PSU?
N
Nejc007
12-09-2016, 04:37 PM #2

The display indicates a PSU swap. Have you already replaced the PSU?

L
lionlord37
Junior Member
30
12-13-2016, 01:38 PM
#3
I included both the Gamemax and Thermaltake PSU in my system specs. This specific alert probably appears because I need to power off the machine using the power button or PSU switch.
L
lionlord37
12-13-2016, 01:38 PM #3

I included both the Gamemax and Thermaltake PSU in my system specs. This specific alert probably appears because I need to power off the machine using the power button or PSU switch.

M
MrKryp
Senior Member
643
12-19-2016, 10:06 AM
#4
it has an issue with the PSU tho, as anti surge protection has turned itself on to protect the system, try to reset bios, or get a brand new psu.
M
MrKryp
12-19-2016, 10:06 AM #4

it has an issue with the PSU tho, as anti surge protection has turned itself on to protect the system, try to reset bios, or get a brand new psu.

C
Celmunchie
Member
192
12-19-2016, 10:41 AM
#5
Sure, I'll try it with a different power supply. Appreciate the advice.
C
Celmunchie
12-19-2016, 10:41 AM #5

Sure, I'll try it with a different power supply. Appreciate the advice.

I
ImNico7
Junior Member
47
12-19-2016, 11:20 AM
#6
I have reinitialized my BIOS and replaced the power supply. The attached results are provided.
I
ImNico7
12-19-2016, 11:20 AM #6

I have reinitialized my BIOS and replaced the power supply. The attached results are provided.

U
Unfair_Jo
Junior Member
33
12-19-2016, 12:20 PM
#7
You pressed F1 and the cursor blinked.
U
Unfair_Jo
12-19-2016, 12:20 PM #7

You pressed F1 and the cursor blinked.

L
Lips
Senior Member
624
12-21-2016, 05:25 PM
#8
Yes, the cursor remains steady without any movement.
L
Lips
12-21-2016, 05:25 PM #8

Yes, the cursor remains steady without any movement.

B
binqiu9999
Member
63
12-21-2016, 07:50 PM
#9
Are you linked to a GPU or Igpu? Attempt to disconnect any disks temporarily. Proceed straight into BIOS. First, turn off the power and swap the CLR CMOS jumper, leaving it on for 10 seconds before swapping back and restarting.
B
binqiu9999
12-21-2016, 07:50 PM #9

Are you linked to a GPU or Igpu? Attempt to disconnect any disks temporarily. Proceed straight into BIOS. First, turn off the power and swap the CLR CMOS jumper, leaving it on for 10 seconds before swapping back and restarting.

X
xCattyx
Member
196
12-23-2016, 09:58 AM
#10
Linked to GPU. Proceeding to disconnect the disk and reset the BIOS.
X
xCattyx
12-23-2016, 09:58 AM #10

Linked to GPU. Proceeding to disconnect the disk and reset the BIOS.

Pages (2): 1 2 Next