Seeking guidance on installing a network switch in your space.
Seeking guidance on installing a network switch in your space.
About two years ago I installed an ethernet cable to my room because my metal loft bed was interfering with the wifi signal (my house isn’t modern enough for built-in ethernet). It’s working well for my computer and now I’m using more on my PS4, but the cable isn’t long enough. I’m considering adding a network switch, though I don’t have an extra power outlet in the room. I know Power over Ethernet exists, but I’m unsure if it needs a special modem/router or if there’s a low-power model that can run off my TV’s USB port. Any other ideas would be helpful. *I own a Netgear C6300 combo unit.*
PoE delivers electricity to equipment at the receiving end. Some switches work with PoE, but I’m not aware of any USB-powered ones. You’ll need a PoE-enabled switch and an injector on the opposite side, possibly near the modem, or you might have to add a power strip in your room for extra outlets.
Your scenario doesn't need PoE or any special setup beyond a standard wall outlet. The devices you mentioned work with regular power, just rely on the wall plug to supply energy to the network equipment. From what I understand, these products are used at home for splitting internet lines in different rooms without needing extra power sources.
You already have a large power strip with multiple outlets, including one wall-mounted one. For PoE you’d add an injector on the modem or router side and then a switch that supports PoE.
The first option seems to end the link with the inactive gadget, which makes sense since it means my PS4 can't get updates while asleep. This could be the only choice I have. The alternative would be nice if there was another power source available.
The issue seems to be insufficient outlets—your power consumption might prevent adding a power strip without overloading the existing fuses. Some users report working with multiple devices simultaneously, so investigate similar products. Try searching online for "Ethernet splitter" to gather more details.
They probably performed well when the house was constructed...no need to stress about old glass tube breakers. I get it. Your constraints seem to stem from that point. It’s likely your restrictions are limited there. I’m guessing there are non-powered Ethernet splitters available, though I don’t have time right now to explore thoroughly. The link I mentioned might have worked without extra power, and it could be your only choice—just keep researching further.