F5F Stay Refreshed Hardware Desktop Seeking assistance with RAM performance issues during overclocking.

Seeking assistance with RAM performance issues during overclocking.

Seeking assistance with RAM performance issues during overclocking.

C
catseecoo
Senior Member
Find
662
10-17-2018, 05:02 AM
#1
Hello, I'm looking for guidance on running my memory module at the recommended speed safely. The module I have is a 3600MHz CL16 with 2x16GB, and the rated speed is 3600Mhz. I've tried using a Ryzen DRAM calculator, but most guides aren't suitable for this setup. I want to ensure stability and protect the lifespan of my memory without risking damage. Anyone with experience can advise me on the best approach? Thanks!
Reply
Reply
C
catseecoo
10-17-2018, 05:02 AM #1

Hello, I'm looking for guidance on running my memory module at the recommended speed safely. The module I have is a 3600MHz CL16 with 2x16GB, and the rated speed is 3600Mhz. I've tried using a Ryzen DRAM calculator, but most guides aren't suitable for this setup. I want to ensure stability and protect the lifespan of my memory without risking damage. Anyone with experience can advise me on the best approach? Thanks!

Reply
Reply
M
minisega
Member
Find
115
10-17-2018, 08:08 PM
#2
place them in slots 2 and 4, move to bios and turn on XMP/DOCP
Reply
Reply
M
minisega
10-17-2018, 08:08 PM #2

place them in slots 2 and 4, move to bios and turn on XMP/DOCP

Reply
Reply
X
XGigaPL
Member
Find
172
10-17-2018, 08:33 PM
#3
Thank you for your response. I attempted it and the system became unstable, with random blue screens related to file handling. In CMD I checked the memory and found some hardware issues. When I turned off the DOCP and reran the test, everything worked properly again, and the system returned to normal.
Reply
Reply
X
XGigaPL
10-17-2018, 08:33 PM #3

Thank you for your response. I attempted it and the system became unstable, with random blue screens related to file handling. In CMD I checked the memory and found some hardware issues. When I turned off the DOCP and reran the test, everything worked properly again, and the system returned to normal.

Reply
Reply
M
mineblork
Member
Find
208
10-17-2018, 10:02 PM
#4
Ram is located in slots 2 and 4. Reattempt with xmp enabled. Verify voltage remains stable at 1.35 and SOC at 1.1 if needed.
Reply
Reply
M
mineblork
10-17-2018, 10:02 PM #4

Ram is located in slots 2 and 4. Reattempt with xmp enabled. Verify voltage remains stable at 1.35 and SOC at 1.1 if needed.

Reply
Reply
I
ISB_Jack
Junior Member
Find
20
11-05-2018, 05:00 AM
#5
It's likely on slots 2 and 4. I tested with a voltage of 1.35, and the SOC remained at 1.025 using auto mode. Switching to manual didn't change it.
Reply
Reply
I
ISB_Jack
11-05-2018, 05:00 AM #5

It's likely on slots 2 and 4. I tested with a voltage of 1.35, and the SOC remained at 1.025 using auto mode. Switching to manual didn't change it.

Reply
Reply
X
Xx_Elite102_xX
Member
Find
195
11-05-2018, 04:40 PM
#6
That's unusual, you should be able to adjust it to 1.1.
Reply
Reply
X
Xx_Elite102_xX
11-05-2018, 04:40 PM #6

That's unusual, you should be able to adjust it to 1.1.

Reply
Reply
C
Chiller9592
Senior Member
Find
670
11-05-2018, 06:28 PM
#7
I just tested it, selected DOCP with a 3606 MHz profile. Voltage set to 1.35V and SOC manual at 1.1. Attempted some operations but it keeps crashing with a blue screen that appears very quickly, making it hard to read the code.
Reply
Reply
C
Chiller9592
11-05-2018, 06:28 PM #7

I just tested it, selected DOCP with a 3606 MHz profile. Voltage set to 1.35V and SOC manual at 1.1. Attempted some operations but it keeps crashing with a blue screen that appears very quickly, making it hard to read the code.

Reply
Reply
M
Maffin_
Member
Find
181
11-06-2018, 05:11 AM
#8
I attempted to reinstall Windows, but after setting up DOCP Profile 1 from the original installation, a blue screen appeared after four days. The Event Viewer listed a page fault error with details about the bugcheck and a saved dump file. It seems the system reported an issue related to leap second configuration during boot. I’m unsure if I need to contact support for RAM, motherboard, or settings, as I doubted the problem was with the RAM itself.
Reply
Reply
M
Maffin_
11-06-2018, 05:11 AM #8

I attempted to reinstall Windows, but after setting up DOCP Profile 1 from the original installation, a blue screen appeared after four days. The Event Viewer listed a page fault error with details about the bugcheck and a saved dump file. It seems the system reported an issue related to leap second configuration during boot. I’m unsure if I need to contact support for RAM, motherboard, or settings, as I doubted the problem was with the RAM itself.

Reply
Reply