F5F Stay Refreshed Hardware Desktop Screen blocked by bio information Need help resolving this issue?

Screen blocked by bio information Need help resolving this issue?

Screen blocked by bio information Need help resolving this issue?

G
ghostcloud22
Junior Member
45
09-16-2016, 08:17 AM
#1
Ordered a new motherboard online, Ram has been set up correctly and all cables are in place. I started the PC with a Windows 10 hard drive. The screen shows Gigabyte Dual BIOS, but I can't press any key to exit. Many attempts were made—new RAM, new drive, replacing the battery—but nothing works. The specs are: CPU i5, Motherboard GA-H61M-S2PV, RAM Samsung 2GB 1333MHz, GPU 750 Ti, BIOS version unspecified.
G
ghostcloud22
09-16-2016, 08:17 AM #1

Ordered a new motherboard online, Ram has been set up correctly and all cables are in place. I started the PC with a Windows 10 hard drive. The screen shows Gigabyte Dual BIOS, but I can't press any key to exit. Many attempts were made—new RAM, new drive, replacing the battery—but nothing works. The specs are: CPU i5, Motherboard GA-H61M-S2PV, RAM Samsung 2GB 1333MHz, GPU 750 Ti, BIOS version unspecified.

C
Connecticut
Junior Member
47
09-16-2016, 09:18 AM
#2
You need to configure Windows 10... ADJUSTMENT: The system should start from the HDD, likely under the boot menu.
C
Connecticut
09-16-2016, 09:18 AM #2

You need to configure Windows 10... ADJUSTMENT: The system should start from the HDD, likely under the boot menu.

D
Davsqweed101
Junior Member
38
09-18-2016, 03:46 PM
#3
Windows 10 was installed on a different machine, but I just transferred the hard drive. The system freezes on the screen and won’t let me modify the boot settings.
D
Davsqweed101
09-18-2016, 03:46 PM #3

Windows 10 was installed on a different machine, but I just transferred the hard drive. The system freezes on the screen and won’t let me modify the boot settings.

M
MaxIsTriggred
Member
110
10-08-2016, 02:26 AM
#4
Turn it off and reset the CMOS, then check if it improves.
M
MaxIsTriggred
10-08-2016, 02:26 AM #4

Turn it off and reset the CMOS, then check if it improves.

M
mickblue2
Junior Member
44
10-09-2016, 04:35 PM
#5
Removed the battery, CMOS was reset using a jumper, but freezing persists during boot.
M
mickblue2
10-09-2016, 04:35 PM #5

Removed the battery, CMOS was reset using a jumper, but freezing persists during boot.

I
Ivanrah
Junior Member
13
10-11-2016, 03:04 PM
#6
Have you bought the board? I can exchange it if needed.
I
Ivanrah
10-11-2016, 03:04 PM #6

Have you bought the board? I can exchange it if needed.