Same old micro stutters with Ryzen 9800X3D?
Same old micro stutters with Ryzen 9800X3D?
Have you performed a stress test and benchmark? Check stability under full load and compare your results to others online to determine if you're within range and refine your settings? Stop adjusting the bios except when necessary or you're certain of the changes. CPU, adjust the -10 CO setting. Once stable, reduce it gradually in small steps. Many, including myself, can reach nearly the maximum of -25 with a quality board. DCOP and EXPO are not effective. Based on my experience, they don't function like XMP does with Intel. Enable the Asus memory tool, observe the timing values it provides, and adjust accordingly.
6400 mhz GDDR5 32x2 (currently operating at 6000 mhz)
Do you have a link to the RAM kit?
Windows 11 is version 23h2, not 24h2
This could be the root cause partially.
The next step would be to clean the OS and install it in offline mode; see: https://www.youtube.com/shorts/_GuFH9KdHC0
Then install all necessary drivers using the latest versions via an elevated command, such as right-clicking the installer and selecting Run as Administrator.
Make sure to update your BIOS to the most recent non-beta release.
Please mention the motherboard’s BIOS version for context.
You didn’t specify the PSU make and model.
Sorry for the missing details, it was late for me.
Latest bios info: Version 1003, Beta not installed yet (1103).
Power supply: EVGA Gold rated 1200w
Memory kits: Check out this link on Newegg – G.SKILL Trident Z5 RGB Series 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6400 (PC5 51200) Desktop Memory Model F5-6400J3239G32GX2-TZ5RW
https://www.newegg.com/g-skill-64gb-ddr5...6820374511
They aren't Expo, but I can use OCDP or whatever is available.
The only part reused is the RTX 3080, which I was using in my last build.
I chose 23h2 because I noticed problems with 24h2 from friends.
Have you experimented with adjusting your Precision Boost in the BIOS or applying PBO2 as a task in Windows? My 5800X3D had similar results, and I adjusted the settings to maintain all cores boosted for longer, though it increased the temperature slightly. I recommend checking YT guides.