Safe OC for I5 6600K
Safe OC for I5 6600K
Hey guys,
So i've decided to boost my i5 6600k, but before doing that i want to know the safe one.
I don't want to maximize it tbh.
cpu: i5 6600k
Mbu: z170 pro gaming
gpu: gtx 1060 6gb rog strix
cpu cooler: Noctua nh d15s
I've checked the forums but there isn't a clear answer to this question.
Cheers Soort
Yeah I'm in agreement. A 4.5GHz overclock is reasonable, though not extremely high. Since each chip behaves differently, I'd configure the voltage to offset mode (reducing it when the CPU isn't under load or boost), set BCLK to 100, multiplier to 45, and voltage to 1.30 as a starting point for testing. If the system boots and passes a stress test (15 minutes for initial setup), gradually lower the voltage in steps of 0.005v until it fails (like 1.295, 1.290, etc.). Then revert to the previous stable setting, which I always note down during experiments. Finally, run a prolonged stress test for several hours to confirm full system stability.
It should be possible to reach at least 4.5ghz with your current configuration. Overclocking requires careful handling and patience. Personally, I simply adjust the CPU multiplier in the BIOS to the desired clock speed and verify stability. Continue increasing until it fails to boot, then gradually reduce the overclock until it becomes stable again. Voltage adjustments can be considered later, but start with the CPU multiplier only.
I understand your perspective. A 4.5GHz boost is a solid but not exceptional level. Since each chip behaves differently, I’d configure the voltage to offset mode (reducing it when the CPU isn’t under heavy load or boost), set BCLK to 100, multiplier to 45, and voltage to 1.30 as a starting point for testing. If the system boots and passes the stress test (about 15 minutes from the start), gradually lower the voltage in steps of 0.005v until it fails (like 1.295, 1.290, etc.). Then revert to the previous stable setting, which I usually note on a notepad during experiments. Finally, run a prolonged stress test for several hours to confirm overall stability.
Remember, overclocking is a process. No two CPUs perform identically—results vary widely. Avoid comparing your outcomes with others. Just focus on the fun of exploration!
Tomorrow I'm planning to try it, I'll make the updates. Appreciate the details, team!
Cheers, Soort