s about router improvements
s about router improvements
Your network seems unstable despite multiple ISP outages. I suspect the router might be struggling under the load. With 40+ devices connected, it’s important to confirm your router’s capacity. You’re currently using a modem with a Netgear router and a switch that has no Wi-Fi AP. Make sure the switch is properly configured and not overloaded. Since you don’t have time for complex setups like adding pfSense, consider a consumer-grade router that supports multiple WAN connections and good performance under stress. The link you shared looks promising—worth checking if it fits your needs.
Turn on the router's Wi-Fi settings. Consumer networks typically allow up to 10 devices, possibly 20 when not all are active. With two Wi-Fi connections (one inactive), connect half your devices to each access point using unique SSIDs and channels. Your router supports 40 users simultaneously, but the Wi-Fi limits you.
Thanks for the guidance. It seems the issue isn't with the Wi-Fi itself. All connections are being lost, even though the PCs are hardwired. Turning on the router would put extra strain on its processor. Your current model is a Nighthawk X4S with AC2600 support and supports up to 2500 sq ft and 45 devices. I understand you're considering adding another router or separating devices, but I'm worried it might still limit performance if the problem lies with your own setup rather than your ISP.
You determine the issue by checking if the device was dead or restarting after being dropped. The router seems solid, so the problem likely lies with the ISP. You should connect to the modem interface—typically it has its own IP such as 192.168.100.1. Verify the connection status there to confirm the issue.
I'm not sure if it's the router itself. The one I shared is just for Wi-Fi. I have another router linked to the modem, then to a switch. The Nighthawk is running out of the switch to support the wife in the house. Modem, router, switch and server are all in a closet together, with the Nighthawk on the second floor to cover the whole place. I plan to check the modem's interface, which would be helpful. I'm hoping for a solid router to address both issues at once. Getting a good one with firewall and enough ports (to handle many connections) would be ideal. And if it doesn't fix my connectivity problems, that would be even better. The ISP has inspected all the lines, replaced some hardware on the street, and provided me with a new modem. I need to confirm it's not my own equipment before contacting them further.
Here’s a summary of the devices and their connections:
- Device 1: Make/Model: [Device Info]
- Device 2: Make/Model: [Device Info]
- Device 3: Make/Model: [Device Info]
- Cable Type: [RJ45, Ethernet, Coaxial, etc.] (if applicable)
Falcon1986 uses various network gear in sequence. It starts with an ISP cable, then Cat-5E, followed by a Netgear router and switch setup. The configuration continues through Unraid, a server router, a wall jack, and finally switches to TP Link equipment. A Netgear Nighthawk and Switch2 are connected, leading into a PC switch, Xbox, PS4, and more switches. Several routers and switches are linked in a chain, with additional devices like phones, cameras, smart plugs, and streaming gear. The setup is complex but has worked before at another home. It seems the ISP might be involved, though the user suspects pushing limits with a Walmart router.