s about memory improvements
s about memory improvements
Last Year I switched to a Ryzen 7 5800X paired with a Gigabyte x570 Aorus Elite motherboard. Since I was on a tight budget, I opted for cheaper RAM, purchasing a 16GB kit (two 8GB modules) of Corsair Vengeance LPX at 3600MHz in dual channel. (I originally planned to buy a Ryzen 5, before the Ryzen 7 promotion, and ended up with more than expected. My previous PC used DDR3.) Now is the right moment to upgrade, especially with two empty slots. Key points: Adding another 16GB kit from Corsair would be a safe choice, right? Can I also install a 32GB kit (two 16GB modules) alongside my current 16GB setup?
Yes and yes, the best match is using a second unit with identical speed and CL from the same model (Vengeance LPX). It doesn't matter if you're mixing capacities—just ensure they're compatible in channel pairs. For example, ABAB or AABB/ABBA patterns work well for stability and full performance.
Are you really going beyond the 16GB limit? Increasing RAM beyond what you require offers little benefit, and using all four slots isn't necessarily advantageous. Having multiple drives increases load on the IMC. Still, the optimal choice is to purchase a fresh 32GB unit and swap your existing one on the secondary market. This approach minimizes risks and potential problems. Of course, this only makes sense if you genuinely need more storage space.
Are you really using more than it allows right now? It’s hard to say, but I’m seeing 14–15GB of RAM usage while working under load. I’m currently editing videos and doing 3D rendering, which suggests the system is handling it well. I think it should be fine for the 16GB I own. Right now I’m mostly using 1080p, but adding another 16GB might help if I move to 4K in the future. I used to run a high-end i5-4690k until last year.
Yes, in this situation you likely need greater storage. If this was solely for gaming, you probably wouldn’t, so I had to inquire. Many believe they can boost FPS or performance with extra capacity, but it only functions properly when you’re deliberately accessing the filesystem.