F5F Stay Refreshed Hardware Desktop Ryzen Master

Ryzen Master

Ryzen Master

S
SkyInsane
Senior Member
718
02-02-2022, 04:40 AM
#1
I increased my CPU frequency to 4000MHz at 1.1875V and it worked fine. After shutting down and restarting, the overclock vanished and returned to the default 1.3V setting. The problem might be related to power management or BIOS settings. Check if the system is properly configured in Ryzen Master and ensure the voltage settings are correct.
S
SkyInsane
02-02-2022, 04:40 AM #1

I increased my CPU frequency to 4000MHz at 1.1875V and it worked fine. After shutting down and restarting, the overclock vanished and returned to the default 1.3V setting. The problem might be related to power management or BIOS settings. Check if the system is properly configured in Ryzen Master and ensure the voltage settings are correct.

T
Titan_LordHD
Junior Member
37
02-03-2022, 04:58 PM
#2
Consider skipping the overclocking.
T
Titan_LordHD
02-03-2022, 04:58 PM #2

Consider skipping the overclocking.

G
GC_Lewk
Member
219
02-03-2022, 08:16 PM
#3
The system is functioning properly.
G
GC_Lewk
02-03-2022, 08:16 PM #3

The system is functioning properly.

T
timo_1892
Senior Member
715
02-16-2022, 12:26 PM
#4
Do it in bios then?
T
timo_1892
02-16-2022, 12:26 PM #4

Do it in bios then?

K
Kamakazy
Junior Member
22
02-16-2022, 02:26 PM
#5
Set the overclock in BIOS. It will make it active forever. Depending on the tasks and processor, this could be a small boost.
K
Kamakazy
02-16-2022, 02:26 PM #5

Set the overclock in BIOS. It will make it active forever. Depending on the tasks and processor, this could be a small boost.

T
Trayleio
Member
63
02-16-2022, 04:18 PM
#6
Your profile is being saved automatically. Ryzen doesn’t offer much room for overclocking, so PBO isn’t necessary unless you prefer it.
T
Trayleio
02-16-2022, 04:18 PM #6

Your profile is being saved automatically. Ryzen doesn’t offer much room for overclocking, so PBO isn’t necessary unless you prefer it.

C
CaptainAdz
Member
107
02-16-2022, 06:27 PM
#7
Yeah, that should help save time. I’m not great at this yet, so I’ll let the others handle it here.
C
CaptainAdz
02-16-2022, 06:27 PM #7

Yeah, that should help save time. I’m not great at this yet, so I’ll let the others handle it here.