Ryzen 7 5800X Ryzen 7 5800X6E
Ryzen 7 5800X Ryzen 7 5800X6E
Hello. I've added the latest components to a final build. However, I didn't notice the issue because I was using Silent mode throughout. Right now, I'm seeing an unexpected CPU temperature when stressing it with Prime95 or OCCT apps. After running a three-minute stress test, the CPU reached 90°C or 194°F, which seems quite high. The power settings I used were balanced power mode, with the processor in its lowest state at 0% and highest at 100%. My question is clear: what should I do? Some users have tried undervolting the CPU, but I'm wondering if that's safe for a brand-new unit. Shouldn't it perform better? I've noticed others report similar results with lower temperatures using water coolers, which seems surprising. According to AMD, these CPUs can handle 90-95°C, though this might reduce their lifespan. I also learned the heat source isn't in the center but near the CPU corners. My PC setup includes: Ryzen 7 5800X GT, 1030 32GB RAM, DDR4 3600MHz, HyperX Seasonic GX 750 Gold, 7 Compact Dark Rock Pro 4, MSI B550 GAMING EDGE WIFI. The fans are: two 140mm Arctic P14 in front, one 140MM P14 on top, and a 120MM P12 at the back. I'm using Condoctonaut thermal paste and have a photo of it. The cooler was installed correctly; if I increase power, I risk damaging the motherboard. Some people suggest possible causes: 1) CPU overclocking, 2) BIOS setting too high, 3) default voltage, or 4) faulty component.
No heat compound used, instead liquid metal was applied. This method differs significantly from traditional thermal paste. A very thin coating should be placed on both the CPU and cooler prior to installation. Perhaps this was the issue you encountered.
The term 'thin layer' refers to a very delicate coating or film. You're right to aim for a texture similar to dry materials—avoiding anything too shiny or metallic. Focus on achieving a uniform, subtle consistency without any noticeable glow.
And also the tutorial video on how to use it, but avoid placing it on the side with the cooler connection.
They also use it elsewhere; I only attached that video to demonstrate its general application. For typical needs, standard thermal compound works best—such as Thermal Grizzly Hydronaut or Arctic MX-4.