Ryzen 5 1600 OC questions.
Ryzen 5 1600 OC questions.
So the question is about CPU OC and voltage. When you increase the CPU's OC, do you aim for the lowest voltage to achieve the highest frequency? Then you perform a stress test to check if the CPU shuts down or reboots. If it does, you adjust the voltage—raise it if it doesn’t shut down, lower it until you find the best balance between frequency and voltage? How long does an average stress test last? Please don’t say overnight; I don’t want to stay in a hot room or leave the house with a computer under extreme heat. Aida64 Extreme seems suitable for this kind of testing. Update: OC to 3.8 with offset +0.02500. Aida64 stress test showed CPU around 63~64°C after 15 minutes. Updated: returned to default, back to 3.8 with offset +0.01250. 61°C during the Aida64 stress test. I might skip the offset and run it at normal voltage next.
I begin with Memtest86 to check the RAM for errors that could cause instability such as hangs and shutdowns.
I typically perform stress tests lasting 3 to 4 hours, as most problems emerge during that period.
I use a mix of Prime95 (with in-place large FFTs) or OCCT to test CPU, RAM, motherboard, and PSU, and Furmark to assess GPU, PSU.
When combining Prime95 and Furmark, set Prime95 to low priority in Task Manager so Furmark can run smoothly.
If stressing a workstation that runs for 10 to 12 hours, I may extend Prime95 testing to 12 to 24 hours; otherwise, a 3 to 4 hour test should suffice to identify unstable CPU or GPU issues.
Ensure you have adequate temperature monitoring and a suitable system tracking app.
I begin with Memtest86 to check the RAM for errors that could cause instability, such as crashes or shutdowns.
I typically perform stress tests lasting 3 to 4 hours, as most problems emerge during that period.
I use a mix of Prime95 (with large FFTs) and OCCT to test CPU, RAM, motherboard, and PSU, along with Furmark for GPU and PSU.
When combining Prime95 and Furmark, set Prime95 to low priority in Task Manager so Furmark runs smoothly.
For long tests lasting 10 to 12 hours on a workstation, I may extend Prime95 usage to 12 to 24 hours.
Ensure you have adequate temperature monitoring and a system app like HWiNFO.
I begin with Memtest86 to check the RAM for errors that could cause instability, such as hangs and shutdowns.
I typically perform stress tests lasting 3 to 4 hours, as most problems emerge during that period.
I use a mix of Prime95 (in-place large FFTs) to test the CPU, RAM, motherboard, and PSU, and Furmark to challenge the GPU.
If I run a stress test on a workstation that runs for 10 to 12 hours, I might extend Prime95 testing to 12 to 24 hours; otherwise, a 3 to 4 hour test should suffice to identify an unstable CPU or overclocking issue.
I previously ran Prime95 on stock hardware and noticed my CPU temperature exceeded 80°C within a minute, which seems unusual.