Run CPU without high Cinebench, improve CPU scores on CPU utilization charts
Run CPU without high Cinebench, improve CPU scores on CPU utilization charts
The issue lies with the auto-adjustment. It often caps at 95W, so higher voltages hit the limit sooner, reducing turbo efficiency. You should raise the limits—around 1.v/4.7GHz is likely above 135W.
The Turbo Ratio was configured for all cores, while Turbo Mode Parameters remain auto-adjusted. You can view the settings here: https://imgur.com/a/xincBGw
Do you have the rights to modify those "Auto" settings? Also, can you set your BCLK frequency to 102.9?
Consider installing "Intel Extreme Tuning Utility" and adjusting from there. You might be able to fine-tune a 2700k processor using it. It simplifies overclocking within your operating system, making testing more convenient. Remember to restore all default BIOS settings before proceeding.
Yes, you adjusted the long duration power limit. It's the most critical setting.
That's why I recommended he try Intel Extreme Tuning Utility...provided you have a 2700k. It feels more natural, and tweaking suggestions are simpler to apply.
I used Intel Extreme Tuning Utility again, same outcome. Yes, I did it.