RTX 5060 artifacts
RTX 5060 artifacts
Tengo esta PC
R5 5600G
B450 DS3H V2 - F67
16GB Corsair 3600Mhz
Corsair CX650M
RTX 5060
este modelo
Compré una Asus Prime RTX 5060 y después de dos días no hubo problemas en Battlefield 6 y Cyberpunk 2077. El tercer día, al minimizar a BF6, aparecieron artefactos. Esto ocurrió solo con Battlefield 6, no tengo idea si sucede en otros juegos. En ese momento probé todos los puertos DP y HDMI y el problema persistió en todos ellos. Jugué un video y también mostré artefactos. Reinicié la PC y no volvió a ocurrir hasta ahora en BF6. Esto está sucediendo con 581.80 drivers. No he probado versiones anteriores ni el parche de Nvidia que salió hace unos días. Antes de instalar esta GPU usaba DDU para eliminar los drivers de mi GTX 1650 que Windows instalaba automáticamente. Por lo tanto, no creo que sea un fallo del sistema… ¿o es? Las temperaturas de la RTX son normales (64°C) durante el juego, está bien conectada y ya reinstalei los drivers, pero volvió a suceder hoy. También hice una prueba de memoria con OCCT para estresar la RAM y no encontré errores. La única cosa que hice mientras la GPU funcionaba bien fue activar la decodificación 4G y el ajuste Resizable-BAR, lo cual parece mejorar el rendimiento. Contacté a NVIDIA pero no encontramos una solución y me pidieron algunos archivos del sistema. ¿Alguna idea?
Imágenes
did you attempt the alternative BIOS configuration for the GPU? turn off the computer, move the switch on the GPU to the opposite side, restart the system to see if it works again.
these switches might be misplaced after shipping, so they could be in an intermediate position.
consider updating the GPU BIOS:
https://www.asus.com/latin/motherbo...-8...RTX5060-8G
experiment with a different power supply, GPU cable, adapter, or PSU.
reset the BIOS using a jumper.
are you using any GPU tuning software such as afterburner? remove it.
switch to a different monitor or TV.
unplug and clean the PCIe slot with compressed air or electrical contact spray (wait about an hour before reattaching anything after spraying).
try using another PCIe slot.
otherwise, you might want to test the GPU in another system; it seems to be faulty.
Just to confirm, this issue only shows up when I play BF6 and doesn't happen every time or in other games.
I double-checked the switch—it's correctly set to P.
My GPU is still under warranty, so I don’t want to risk that.
Afterburner was uninstalled.
My monitor has been working at 100% for about 6 to 8 months, which isn’t the problem.
I’m using an electric air duster and plan to try it later.
I’ll test with the 581.94 hotfix driver now.
Thanks for the reply.
I believe the issue might be related to a driver problem, likely an isolated case since others with an RTX 5060 haven’t encountered this. It seems connected to stressing VRAM using OCCT, pushing the GPU with FurMark, and running memtest_vulkan which all passed without updates found.