Router pour Internet en Fibre Optique
Router pour Internet en Fibre Optique
Hello everyone, I hope you're all well. I'm looking for your guidance on selecting network equipment, particularly modems, routers, or a modem/router combo. I'm not very familiar with fiber internet, so please don't mind. I'm setting up a small server room with 40-60 servers—most of them will be idle and mining Chia coins, so bandwidth won't be a major concern. I'll also have some personal servers there. The network speed is 1Gbit/s.
Question 1: Could you suggest a router under $200/€ that fits this setup? It should connect the fiber cable, link to the switch, and then reach the servers.
Question 2: Is the device shown in the first image a traditional Ethernet switch? If so, would it be better to use a separate non-WiFi router connected to it, keeping your old Wi-Fi router for other devices?
Question 3: Do I need a hardware firewall? Since the whole network will be online with a static IP address, do you recommend any specific device? I found a Cisco ASA 5515-X for €190 second-hand with a 120GB SSD, but I'm not sure if it meets my needs. Picture one shows a switch, and the cable connects to the router in picture two. Thank you very much!
The ISP permits various devices but often ties users to their specific hardware. For approved options, contacting their support team can provide a list. This seems to refer to GPON technology. The device in question appears to be a PoS splitter rather than a standard Ethernet switch. Most home routers already include a firewall, which is sufficient. If you need additional protection, consider a DIY solution like a pfSense or untangle box—offering better performance and features without the limitations of gigabit speeds.
Thanks for your message! I’ll reach out right away, thank you. You mentioned using the gpon terminal with Wi-Fi on a router you think is AFAIK. I’m curious if connecting your switch directly to the router via Ethernet would work without slowing things down, especially since it seems like a budget model with only 2.4GHz Wi-Fi. I don’t have the device’s number yet but will have it tomorrow. It sounds like you’re considering an enterprise router instead, which is a bit tricky to find. Ethernet devices are common, so I’m a little unsure about that setup. Looking forward to your update!
The ISP router should deliver the speeds you’re paying for, and if it doesn’t, that’s the ISP’s responsibility to fix. It seems like an optical switch, but since your modem/ONT/router isn’t connected to it (as it’s ISP hardware) and is likely shared, you won’t receive any data from it. The ISP usually dislikes users tampering with their equipment. Are you looking for an enterprise router? A home model should suffice here. For extra features beyond basic home routers, consider DIY options like untangle or pfSense. They’re affordable and you can use an old PC or a rack-mounted server such as a Dell R210. Most business-grade firewalls are licensed annually, costing a few hundred dollars per year to operate.
You're concerned about the performance of your setup with the MIKROTIK RB4011iGS and the 5HacQ2HnD-IN router. It's normal to worry about heat and bottlenecks, especially with multiple devices connected. I hope it can handle around 60 devices without overheating or slowing down. Regarding your questions, yes, you could likely connect the router to your old gateway using an Ethernet cable, but make sure the cables are compatible and the speeds match. As for Turris Shield, it's a solid option—it's affordable, user-friendly, and should work well for basic firewall needs. Let me know if you need help checking compatibility details!
Using Fiber internet limits your choices significantly. Although some ISPs permit customer-owned gear, it usually demands substantial collaboration from the provider and advanced networking expertise from the user. Most users with combo devices, like yours, opt for Bridge mode or Pass through mode. Check if these settings are supported. Full Bridge mode removes the router functionality of the device, letting you connect any router with an Ethernet WAN port. Pass Through mode routes all traffic without altering it, though it’s not a true bridge. A key challenge with Fiber is access methods, which complicates equipment replacement. Contact your ISP to find out what options are available for you. Certain US providers install standard optical converters that transform Fiber into copper connections like Ethernet or coaxial in areas offering TV service.
Thanks! Bridge mode seems like a solid choice. I’ll check with my ISP about an optical converter as well.
Are you relying on a home internet service? Probably the main unit is just a splitter. You can’t change that. The output goes through fiber into the gateway—like a media converter, router, switch, or AP—which is a Hauwei HG8245H, similar to what I have. This equipment is heavily restricted by your ISP. If you need to swap it out, you’ll need to reach out directly to the ISP to check availability. It may not work on a residential plan, but a business plan could be an option.