ROG STRIX b350 & Ripjaws V 3200 with 16gb storage. Running at 3066
ROG STRIX b350 & Ripjaws V 3200 with 16gb storage. Running at 3066
It's just one rank, so that shouldn't be a problem.
Check the bios and adjust CR to 2T (from 1).
Try the lower clock to possibly reduce voktage.
Use memtest86+ instead of just memtest, burn it to a CD and boot from there.
Execute two full tests and verify it completes without errors.
Perform test 5, 6, and 7 multiple times each—they're more sensitive to issues.
I switched cmd2t to Auto to 2T, but CPU-Z still lists it as 1T.
Disconnect the power cord. Activate the power button on the case for 10 seconds to remove any remaining charge. Take out the CMOS battery for 20 seconds, then reinstall it. Reconnect the cord and start up into BIOS. Apply default settings, restart, and adjust the BIOS configuration once more.
Unplug power cord.
Press the power button on the case for 10 seconds to discharge any remaining current.
Remove the CMOS battery for 20 seconds, then reinsert it.
Plug the cord back in and boot into BIOS.
Apply default settings, reboot, and adjust the BIOS configuration again.
Good day. Sorry, I didn't have internet access for a few days. I'll try and update the comment later.
Edit* No. I wasn't able to complete it, but I managed to lower the timings to 14-16-16-36 with 2933.
🙁
The gap between 2933Mhz and 3200Mhz isn't too big to let you down. Thanks to all the people supporting me. At least I managed to stabilize my RAM with better timing.