F5F Stay Refreshed Power Users Networks rj11 cat5

rj11 cat5

rj11 cat5

A
alejandrobo1
Posting Freak
877
09-11-2016, 12:17 PM
#1
I dislike AT&T internet at home. Oddly enough, they use a Cat5 cable with an RJ11 port. The length is only about 6 feet, but I need a 25-foot cable. Since I’m rearranging furniture, I require a longer one. Where can I purchase a Cat 6 RJ11 25-foot cable?
A
alejandrobo1
09-11-2016, 12:17 PM #1

I dislike AT&T internet at home. Oddly enough, they use a Cat5 cable with an RJ11 port. The length is only about 6 feet, but I need a 25-foot cable. Since I’m rearranging furniture, I require a longer one. Where can I purchase a Cat 6 RJ11 25-foot cable?

C
Coolpius
Member
142
09-11-2016, 07:33 PM
#2
RJ11 is designed for mobile devices. You won't find cat5 or cat6 cables with RJ11 connectors—this explains why you don’t see cat6 cables paired with RJ11 jacks. Ethernet connections require RJ45 ports. The cat5 cable works well for 100 Mbps, and even shorter runs suffice for 1 Gbps. Cat5e is intended for 1 Gbps speeds... and it seems unlikely you’ll find cat5 Ethernet cables available in 2019. It’s likely the cables you see are specifically for phones.
C
Coolpius
09-11-2016, 07:33 PM #2

RJ11 is designed for mobile devices. You won't find cat5 or cat6 cables with RJ11 connectors—this explains why you don’t see cat6 cables paired with RJ11 jacks. Ethernet connections require RJ45 ports. The cat5 cable works well for 100 Mbps, and even shorter runs suffice for 1 Gbps. Cat5e is intended for 1 Gbps speeds... and it seems unlikely you’ll find cat5 Ethernet cables available in 2019. It’s likely the cables you see are specifically for phones.

G
GhostGG
Member
170
09-12-2016, 01:05 AM
#3
I verified everything thoroughly. I also looked at forums and they mention using the phone jack (RJ11) for Cat5. The cable specifies that, which causes interference. I’m planning to switch to Cat6.
G
GhostGG
09-12-2016, 01:05 AM #3

I verified everything thoroughly. I also looked at forums and they mention using the phone jack (RJ11) for Cat5. The cable specifies that, which causes interference. I’m planning to switch to Cat6.

Y
Yobo02
Junior Member
47
09-16-2016, 05:58 AM
#4
You don't require cat6, simply purchase shielded cat5.
Y
Yobo02
09-16-2016, 05:58 AM #4

You don't require cat6, simply purchase shielded cat5.

N
Nayyls
Junior Member
23
09-16-2016, 08:22 PM
#5
Where exactly are you looking for them?
N
Nayyls
09-16-2016, 08:22 PM #5

Where exactly are you looking for them?

I
IGraffie
Member
54
09-17-2016, 12:49 AM
#6
Unless you're from Finland, I recommend checking eBay or similar sites.
I
IGraffie
09-17-2016, 12:49 AM #6

Unless you're from Finland, I recommend checking eBay or similar sites.

F
Flow_Neck
Member
102
09-17-2016, 01:49 AM
#7
Many contractors today primarily rely on Cat5e for Ethernet and phone connections. It's more economical to purchase cables in bulk rather than carrying multiple types. I believe Cat3 (for phone) has largely disappeared. You're correct—networking cable can be used for phones, but you only need about half the wires. As @WereCatf mentioned, shielded cabling is necessary when dealing with interference. Or simply avoid running cables near electrical sources.
F
Flow_Neck
09-17-2016, 01:49 AM #7

Many contractors today primarily rely on Cat5e for Ethernet and phone connections. It's more economical to purchase cables in bulk rather than carrying multiple types. I believe Cat3 (for phone) has largely disappeared. You're correct—networking cable can be used for phones, but you only need about half the wires. As @WereCatf mentioned, shielded cabling is necessary when dealing with interference. Or simply avoid running cables near electrical sources.

E
Elina_Aada20
Member
141
09-24-2016, 05:49 PM
#8
I spotted something interesting
I located an item
You can check it out
E
Elina_Aada20
09-24-2016, 05:49 PM #8

I spotted something interesting
I located an item
You can check it out