F5F Stay Refreshed Hardware Desktop RGB functionality is not active and the interface fails to recognize the iCUE H100i ELITE LCD AIO cooler.

RGB functionality is not active and the interface fails to recognize the iCUE H100i ELITE LCD AIO cooler.

RGB functionality is not active and the interface fails to recognize the iCUE H100i ELITE LCD AIO cooler.

I
ItzJJ_Gamer
Junior Member
2
03-22-2021, 04:27 PM
#1
Hello! The AIO cooler is functioning properly, but I'm seeing no fan RGB or cooler LED detection on the system. When it starts, the RGB only flashes briefly before turning off a short time later. Using the commander core to control both fans and RGB works fine. The LED display for the AIO shows the coolant temperature as usual. One fan has an RGB light covering part of it, while another flickers intermittently. Everything was installed recently and previously didn't work. Looking for any tips to fix detection issues. PC specs: 750W PSU, 3070TI RYZEN 7, 5800x64GB RAM, x570-p motherboard, Windows 10 (up to date).
I
ItzJJ_Gamer
03-22-2021, 04:27 PM #1

Hello! The AIO cooler is functioning properly, but I'm seeing no fan RGB or cooler LED detection on the system. When it starts, the RGB only flashes briefly before turning off a short time later. Using the commander core to control both fans and RGB works fine. The LED display for the AIO shows the coolant temperature as usual. One fan has an RGB light covering part of it, while another flickers intermittently. Everything was installed recently and previously didn't work. Looking for any tips to fix detection issues. PC specs: 750W PSU, 3070TI RYZEN 7, 5800x64GB RAM, x570-p motherboard, Windows 10 (up to date).

A
Apinanski
Junior Member
13
03-28-2021, 02:30 AM
#2
Connect the fans to an ARGB header, located right above your 24Pin power connector.
A
Apinanski
03-28-2021, 02:30 AM #2

Connect the fans to an ARGB header, located right above your 24Pin power connector.

T
TheFallenRose
Senior Member
616
03-28-2021, 08:30 AM
#3
Check the Corsair setup guide for installing the iCUE Elite Capillix liquid cooler for AMD sockets.
T
TheFallenRose
03-28-2021, 08:30 AM #3

Check the Corsair setup guide for installing the iCUE Elite Capillix liquid cooler for AMD sockets.

D
DERPY__CRUMB
Junior Member
46
04-16-2021, 11:06 PM
#4
The commander core features specific ports for RGB lighting and fans. It includes a SATA link for the power supply unit and an internal USB port. There are no ports available for the internal ARGB header.
D
DERPY__CRUMB
04-16-2021, 11:06 PM #4

The commander core features specific ports for RGB lighting and fans. It includes a SATA link for the power supply unit and an internal USB port. There are no ports available for the internal ARGB header.

R
rosie2435
Senior Member
475
04-24-2021, 07:49 PM
#5
You need to access the commander pro settings and inform it about the linked LED channels so it can send signals to the RGB device.
R
rosie2435
04-24-2021, 07:49 PM #5

You need to access the commander pro settings and inform it about the linked LED channels so it can send signals to the RGB device.

_
_ComanderHD_
Member
62
04-24-2021, 09:31 PM
#6
Adhered to the instructions after setup and confirmed again, but no changes detected.
_
_ComanderHD_
04-24-2021, 09:31 PM #6

Adhered to the instructions after setup and confirmed again, but no changes detected.