F5F Stay Refreshed Hardware Desktop Restart with XMP enabled

Restart with XMP enabled

Restart with XMP enabled

T
Tyger698
Member
54
10-06-2016, 10:50 PM
#1
Determine who should be held responsible for restarting when XMP is activated—Mobo or RAM. Ran a RAM diagnostic via Windows Memory Diagnostic and saw no issues. Also, updated the motherboard BIOS.
T
Tyger698
10-06-2016, 10:50 PM #1

Determine who should be held responsible for restarting when XMP is activated—Mobo or RAM. Ran a RAM diagnostic via Windows Memory Diagnostic and saw no issues. Also, updated the motherboard BIOS.

O
Ogpooks
Junior Member
3
10-14-2016, 05:02 AM
#2
Are you experiencing a restart when enabling XMP? Could you share your CPU, motherboard, and RAM details? It seems you might be pushing performance beyond the rated limits on ASUS boards (and possibly other models I haven’t used much). Running OCCT could help identify issues that standard Windows diagnostics might overlook.
O
Ogpooks
10-14-2016, 05:02 AM #2

Are you experiencing a restart when enabling XMP? Could you share your CPU, motherboard, and RAM details? It seems you might be pushing performance beyond the rated limits on ASUS boards (and possibly other models I haven’t used much). Running OCCT could help identify issues that standard Windows diagnostics might overlook.

I
iBrendan
Junior Member
34
10-15-2016, 11:29 AM
#3
CompuTer restart isn't simply after turning on XMP; it happens randomly, likely during a YouTube video or just browsing the web. Or perhaps, in very rare cases, while playing Mobo: Gigabyte B450M S2H with 3600x32GB and 3200MHz Gskill Ripwajs RX 6600xt, running OCCT didn't reveal any issues.
I
iBrendan
10-15-2016, 11:29 AM #3

CompuTer restart isn't simply after turning on XMP; it happens randomly, likely during a YouTube video or just browsing the web. Or perhaps, in very rare cases, while playing Mobo: Gigabyte B450M S2H with 3600x32GB and 3200MHz Gskill Ripwajs RX 6600xt, running OCCT didn't reveal any issues.

D
dinomatt7
Junior Member
5
10-15-2016, 12:44 PM
#4
Are you curious? I can run more RAM sticks too, start with one first if you'd like.
D
dinomatt7
10-15-2016, 12:44 PM #4

Are you curious? I can run more RAM sticks too, start with one first if you'd like.

I
Ix_Tha_God_xI
Member
96
10-24-2016, 09:09 AM
#5
You're using two sticks, and the frequency is around 2666mhz.
I
Ix_Tha_God_xI
10-24-2016, 09:09 AM #5

You're using two sticks, and the frequency is around 2666mhz.

K
KammaQwazi
Junior Member
9
10-24-2016, 03:00 PM
#6
No logs appear in the Event Viewer near the restart times. The system displays the usual Windows restart interface instead of a black screen.
K
KammaQwazi
10-24-2016, 03:00 PM #6

No logs appear in the Event Viewer near the restart times. The system displays the usual Windows restart interface instead of a black screen.

R
rafiqmoot1
Junior Member
46
10-24-2016, 04:23 PM
#7
The logs indicate that Windows simply shuts down and requires a restart.
R
rafiqmoot1
10-24-2016, 04:23 PM #7

The logs indicate that Windows simply shuts down and requires a restart.

T
Teth18
Junior Member
15
10-24-2016, 08:56 PM
#8
The system initiates a restart once XMP is activated, indicating an issue with error.evtx.
T
Teth18
10-24-2016, 08:56 PM #8

The system initiates a restart once XMP is activated, indicating an issue with error.evtx.

U
Unyke
Member
146
10-26-2016, 10:58 AM
#9
I encountered an unusual issue where overclocking the RAM led to CPU instability, while RAM itself remained stable (passed tests). Discovering that lowering the CPU voltage (negative Vcore offset) resolves the problem. Additionally, the CPU can become unstable even when BIOS defaults are optimized. It seems my motherboard tends to apply excessive voltages to both CPU and RAM. This might not be relevant to your situation.
U
Unyke
10-26-2016, 10:58 AM #9

I encountered an unusual issue where overclocking the RAM led to CPU instability, while RAM itself remained stable (passed tests). Discovering that lowering the CPU voltage (negative Vcore offset) resolves the problem. Additionally, the CPU can become unstable even when BIOS defaults are optimized. It seems my motherboard tends to apply excessive voltages to both CPU and RAM. This might not be relevant to your situation.