Resolved PC hard reset for Windows and Linux systems. Issue identified as Cache Hierarchy Error (RMA).
Resolved PC hard reset for Windows and Linux systems. Issue identified as Cache Hierarchy Error (RMA).
Hello, thanks for your support. I finally sent the CPU back and they’ll send a replacement. To prevent excessive replies, I chose to update here. If you’re interested in what happened, just keep reading—there might be a fix! My computer suddenly restarts the hard drive even when idle. I looked at journalctl and event viewer and found these entries. The logs show hardware issues like CPU errors, memory problems, and processor malfunctions. It seems there’s a recurring problem that needs attention.
Users have reported problems with these memory modules when paired with Ryzen processors. A good approach would be to run Memtest86 during the night to check for stability issues. It seems the X470/B450 Gigabyte boards have limited memory architecture, particularly with four sticks, so if errors appear, it’s likely a RAM or CPU fault. Removing two sticks might resolve the problem. Such issues usually point to faulty RAM rather than hardware failure, and replacing it is typically more affordable.
Thanks for your prompt response! It seems RAM issues can be a bit concerning, but good news—RAM failure is less common now. I’ll try running Memtest86 and see if it confirms the problem. For Ryzen systems, I’m looking for affordable memory options that are reliable. Any suggestions would be great!
Most Crucial Ballistix sets perform well at a lower cost. For high-end kits you’d need expensive components like 3200MHz CL14, 3600MHz 16-16-16-36, and 4400 CL19-19-19-39. If you really want B Die parts, manual tuning is essential. Choose a 3200MHz CL16 stick for affordability and keep it simple with just two sticks until you decide on the right capacity.
Ballistix 3000 cl15 or 3200 cl16 should be suitable, 3600 cl16 won’t help much because you can raise the lower bins higher anyway. You’ll typically get around 4000 cl16 with a simple tuning (fixed frequency and voltage between 1.4-1.5V), though you could push it to 4500+ cl18 if desired. Mostly ineffective, but it’s likely an option.
Thanks for the ideas on memory sticks! I won’t be able to run a memtest until after work. I updated the journalctl logs during lunch, since CPU 6 and CPU 14 appeared in the error messages.
I removed some RAM in the hope it might work again. Unfortunately, it still resets easily—this CPU seems to be failing. I plan to return it and try getting a replacement soon. I’ll now take some time to examine it thoroughly and rest. It’s a big project! Appreciate all the support!
I've turned off Core Performance Boost to fix the problem, but now I'm limited to 0.9 GHz. My CPU is capped at 3.8 GHz. It seems like a short-term fix until I need to return the processor. Some friends think it might be my motherboard, but I can't confirm that easily. What do you think is most likely?