Resolved: Computer experiencing freezes during setup.
Resolved: Computer experiencing freezes during setup.
could insufficient airflow be the root cause of these freezes? Despite maintaining a cool room temperature by leaving the front panel detached, is this still inadequate? Or do you suspect another potential factor? Frankly, I am uncertain about my progress at this point. Any guidance or recommendations would be greatly valued.
Specifications:
Motherboard - MSI H310M Gaming Arctic
Processor - Intel i5-9600K
CPU Cooler - Cooler Master MasterLiquid ML240L RGB
Memory – Corsair Vengeance 16Gb
Graphics Card - GTX 970
It’s probably necessary to update the motherboard’s firmware to ensure compatibility with the latest 9th generation Intel processors. I encountered discussion online from a user who confirmed this modification resolves the issue. According to the support documentation for your specific motherboard, a minimum BIOS version of 7B28vH3 is required to utilize 9th gen Intel CPUs.
You can download this updated BIOS directly from your motherboard’s flash utility within the BIOS settings if your computer is connected to the internet. Alternatively, you may need to use a USB drive for installation.
It’s probably necessary to upgrade the motherboard's firmware to ensure compatibility with the latest 9th generation Intel processors. I encountered discussions where an individual confirmed that updating the board resolved this issue.
According to the support documentation for your specific motherboard, version 7B28vH3 or higher is required to operate with 9th gen Intel CPUs.
See: https://www.msi.com/Motherboard/support/...ING-ARCTIC
If your newly assembled computer is connected to the internet, you should be able to download this BIOS revision directly through your motherboard’s flash utility within the BIOS settings. Alternatively, you may need to utilize a USB drive for installation.
I can't find a way to modify profiles using M-Flash. Furthermore, I no longer possess a functioning computer due to my own mistake – I formatted the SSD on this PC, which previously served as the boot drive for my previous computer before it ultimately failed.
Simply check the top of the primary screen for your BIOS version. Utilizing M-Flash is quite uncomplicated.