Requesting assistance for Wi-Fi point-to-point devices seeking support
Requesting assistance for Wi-Fi point-to-point devices seeking support
I recently bought another building and need to set up Ethernet. How should I connect it to the one next door? I want to avoid buying a new provider there. What kind of P2P transmitter and receiver would work best? Are there any issues with trees blocking the line that might affect speed? Also, I’m looking for affordable options for the devices. Thanks for your help.
Trees can affect signal strength, ranging from no connection at all to a weak one. It’s generally not advised to use wireless links when trees are present, though they might function in some conditions. Be aware that heavy obstruction could cause drops in dry weather or complete loss in wet conditions—testing is necessary for certainty. Could you check if running fiber between buildings might work?
If both locations support a reliable internet connection, consider using a site-to-site VPN instead of a direct link. This decision hinges on anticipated data volume and your network speed (likely upstream will constrain performance). Also, ensure directional radio isn’t limited by regulations such as transmission power limits.
You’re left with a wireless point-to-point link or an isolated connection in another structure. For a PtP bridge, strong visibility and minimal physical barriers aren’t the sole factors for a reliable link. You’ll also need proper antenna height so the Fresnel zone remains clear, allowing you to boost bandwidth. If cars often cross this route, your signal will be disrupted regularly. Many people overlook that you don’t need to install directional antennas on the building’s side; they can be mounted with grounding for lightning protection. You might also consider a 2.4GHz bridge, which is less affected by interference, though it offers much lower bandwidth. On the other hand, 5GHz and above provide greater potential but are more prone to disruptions from poor line-of-sight or rain.