Request to share AdviceFeedback about a new PC build.
Request to share AdviceFeedback about a new PC build.
Hello,
After years of using my existing configuration, I’m now considering constructing a new PC.
(Current setup: i5 8600K, GTX 1080)
My understanding of components and compatibility is quite limited, so I’d appreciate your insights.
Build details:
CASE - Zalman Z1 Iceberg Vit
CPU - AMD Ryzen 5 7600X
CPU cooler - DeepCool AK400 Zero Dark
GPU - Sapphire Radeon RX 9060 XT 16GB PULSE
Memory - MSI B850M Gaming Plus WIFI6E
RAM - Kingston 32GB (2x16GB) DDR5 5600MHz CL36 FURY Beast AMD EXPO/Intel XMP 3.0
SSD m.2 - WD Black SN7100 1TB Gen 4
Power supply - GamerStorm PK650D 650W
I’m not focused on 1440p gaming; this build will be optimized for 1080p at 144+Hz.
My main concerns are whether the components integrate smoothly without bottlenecks or other problems.
One of my priorities was long-term reliability, so I opted for a PCIe 5.0 slot for the GPU and an AM5 socket, which appears to have support for several more years. This means I could potentially upgrade CPU and GPU later if needed.
I’d also value any suggestions for alternative configurations or general advice.
Thank you in advance for your help!
😊
Do the components integrate smoothly?
The components are suitable, but additional details are required if we're aiming to optimize the assembly and explore ways to improve that specific build.
It's recommended that users format their queries with the information provided here; specifically, how to request guidance on a new build or upgrade.
This power supply is likely faulty. Could you specify where you can buy replacement components?
If you're thinking about future upgrades, it's wise to invest in a superior case and power supply now. The case you choose should have a mostly sealed front, which limits airflow unless the fans are very powerful. A mesh front panel or side intake would be more suitable. For white builds, Silverstone, Montech, and NZXT offer reasonably priced mATX options. Regarding power supply availability, it differs greatly depending on your location, so I wouldn't focus on specific models. If the Montech Century II 850W is affordable in your area, it stands out as a top value PSU with good build quality and warranty.
The information provided does not specify whether the options "DeepCool PL650D 650W ATX 3.1" or "Cooler Master MWE 650W Bronze V3" are better choices. It also does not detail what factors determine a good PSU or what to look for to ensure it meets minimum quality standards.
Thanks for the feedback and ideas! I almost thought the airflow might be a problem but I was optimistic. I changed the case to "Montech X3 Mesh White" and it now has a full mesh front with three fans. 👍 I'm also considering replacing the PSU as suggested in my previous answer to "Helper800".
Understanding which PSUs perform well versus poorly comes from reviews. The majority of high-quality PSUs include warranties lasting over seven years. None of these options are ideal on their own, but they outperform the initial model you mentioned. Are there similar choices that fit your budget?
I checked the site you referenced earlier and noticed the prices rise quickly, especially compared to what I found on https://se.pcpartpicker.com/. I believe you'll need to boost your PSU budget to SEK 1000-1500 to obtain a reliable unit. This appears to be the most affordable option I encountered online, but upgrading to 750-850W seems wise:
https://www.inet.se/produkt/6906762/cors...25-atx-3-1
Just a note: under heavy usage the 2025 RMe from Corsair can be quite noisy, though it won’t stress the system during normal operation. This appears to be one of the best 850W models available for prices under 1500:
https://www.inet.se/produkt/6906892/cool...v3-atx-3-1
Ah I see! The PC you constructed fits within my budget. I had to replace the CPU cooler because it was too heavy for Inet to pre-build before shipping. I chose the "Thermalright Peerless Assassin 120 SE Black" instead.
Curiously, what motivated the decision to select this motherboard? Since the price is higher than my previous pick?
I think I’ll go with the PC you built—it looks much better and isn’t significantly more costly.
The motherboard offers superior VRMs compared to all entry-level models under that price range. It includes most of the features found in higher-end boards, except for a few. There is a more affordable option available, though it isn't currently in stock. If there are any improved boards on that site suitable for your needs, someone will likely share them.