Reporting on GPU at 0mhz and 0MB RAM
Reporting on GPU at 0mhz and 0MB RAM
You just installed a new GPU and opened gpu-z, which displays it in the driver list but not in Task Manager or NiceHash. It appears in MSSI Afterburner, though the interface doesn’t let you adjust settings.
Have you confirmed the drivers were installed? The system is detecting an X4 PCIe connection. You may want to reinsert the card to ensure it’s seated correctly.
The video cable is linked to the GPU, not the motherboard, right? Have you downloaded and installed the newest graphics drivers? Which PCIe slot does the GPU occupy? You should be able to capture a photo there—specifically in the top position, just below the CPU and M.2 SSD area. Let's figure this out first. I think I wouldn't start playing a game just yet.
Are you asking about using two different GPUs together in SLI? It’s not possible to mix a NVIDIA GPU with an AMD GPU. Also, you didn’t mention having two cards installed—just that you added another one. That should help clarify your question.
The issue seems consistent across your setup. You're experiencing memory problems, only have one GPU, and the HDMI connection causes flickering or boot failures. The problem might be related to the GPU's BIOS settings rather than the hardware itself. Your Sapphire RX570 4GB mini ITX card is working, but drivers are failing to download properly. It could help to check the GPU's BIOS configuration or contact the manufacturer for support.