Repare les LED
Repare les LED
My debug LEDs are active on the CPU and DRAM. It began after I relocated. I connected an HD TV because I was at my mom's house in a hurry. After installing a new OS, it would shut down repeatedly in an endless loop. Eventually, I fixed it by formatting and reinstalling Windows 10. Then I moved into my new system and connected my old HD monitor and an AOC 1080p 75Hz display. It worked again. However, it started to shut off randomly and loop sometimes. The last time it powered on, it reported a memory usage of 2133 even though it should have been 3600 cores. It almost booted once before freezing, leaving a blank spot on the screen. Now it doesn’t function properly at all. The debug lights were on for several months before I moved twice. I suspect the issue might be with the motherboard. I could be mistaken, but a brand new memory module didn’t help either. What could be causing this?
I just turned it on to capture an image of the LEDs. It displayed that BIOS had been updated and loaded correctly. The BIOS showed my memory and CPU, then restarted. Now it’s back to the LEDs, indicating the problem is likely in the motherboard. Edited March 19, 2020 by exbass1991
Run the RAM at regular speeds. Ryzen can cause instability even when the chip claims a rate like 3600MHz. Test with just one RAM stick.
It functioned well for moths at 3600, as I mentioned. I used a different kit before, but the issue remained. The last post was at 2133, so I’m not sure what happened.