Remove the stand-off component from the motherboard.

F5F Stay Refreshed Hardware Desktop Remove the stand-off component from the motherboard.

Pages (2): 1 2 Next

BaccaStrq123
Senior Member

664

10-31-2019, 09:53 PM

You're unsure about removing the standoff from your Gigabyte AORUS X570 Elite motherboard. In short, locate the standoff, gently pull it out carefully, and ensure you have the right tools for the job.

BaccaStrq123

10-31-2019, 09:53 PM #1

pegasusXman
Member

194

11-01-2019, 01:53 PM

You're likely thinking about the 110 mm NVME port. Yes, it has a crosscut for a Philips screwdriver, which can make turning it easier with your thumbs if needed.

pegasusXman

11-01-2019, 01:53 PM #2

You're likely thinking about the 110 mm NVME port. Yes, it has a crosscut for a Philips screwdriver, which can make turning it easier with your thumbs if needed.

AskedRumble52
Member

216

11-01-2019, 02:08 PM

Collect the pair of pliers, grasp the standoff, and rotate it counter-clockwise slowly. Take your time and be patient.

AskedRumble52

11-01-2019, 02:08 PM #3

Collect the pair of pliers, grasp the standoff, and rotate it counter-clockwise slowly. Take your time and be patient.

Tracyy14
Member

133

11-02-2019, 04:36 PM

It's only the screw for the SSD. It seems to be still not working.

Tracyy14

11-02-2019, 04:36 PM #4

It's only the screw for the SSD. It seems to be still not working.

Rxnger
Member

198

11-03-2019, 09:55 AM

It seems you're asking about something unclear. Could you provide more details or clarify your question?

Rxnger

11-03-2019, 09:55 AM #5

It seems you're asking about something unclear. Could you provide more details or clarify your question?

Sashle
Junior Member

11-04-2019, 04:13 PM

Do you know what pliers are?

Sashle

11-04-2019, 04:13 PM #6

Do you know what pliers are?

2Gustav
Member

11-04-2019, 04:19 PM

You might opt for a Phillips screwdriver, remove the screw, and then take off the standoff.

2Gustav

11-04-2019, 04:19 PM #7

You might opt for a Phillips screwdriver, remove the screw, and then take off the standoff.

xRawzx
Member

177

11-09-2019, 01:52 AM

I successfully loosened it using a flathead. It was just tightly secured afterward.

xRawzx

11-09-2019, 01:52 AM #8

I successfully loosened it using a flathead. It was just tightly secured afterward.

nahte5
Member

206

11-09-2019, 04:20 AM

This model of M5 is designed to remove these particular screws (standoffs).

nahte5

11-09-2019, 04:20 AM #9

This model of M5 is designed to remove these particular screws (standoffs).

JGbb
Member

163

11-09-2019, 07:10 PM

#10

Good to know

JGbb

11-09-2019, 07:10 PM #10

Good to know

Pages (2): 1 2 Next