Remote Desktop

TheSimple
Member

229

08-27-2016, 08:24 AM

Your Windows 10 PC seems to be experiencing issues with remote access after a restart. It might help to check for software updates, run a system scan, or ensure network settings are correct. If problems persist, consider restarting in safe mode to isolate potential conflicts.

TheSimple

08-27-2016, 08:24 AM #1

kensteele
Member

114

08-27-2016, 12:55 PM

Turn off remote access, apply, then turn it back on. This generally resolves the issue for me. Verify if your IP address remains unchanged. Once the DHCP lease expires, a restart initiates a fresh lease, occasionally resulting in a different address.

kensteele

08-27-2016, 12:55 PM #2

Maria7300
Member

221

08-27-2016, 01:14 PM

I rely on the netBIOS host name for RDP because consumer routers rarely provide stable IP addresses to identical devices.

Maria7300

08-27-2016, 01:14 PM #3

I rely on the netBIOS host name for RDP because consumer routers rarely provide stable IP addresses to identical devices.

kk900314
Junior Member

08-27-2016, 09:30 PM

It functions adequately when connected to the same network. I frequently connect through a VPN, but NetBIOS resolution fails under that setup. That's why I favor using fixed IP addresses instead.

kk900314

08-27-2016, 09:30 PM #4

It functions adequately when connected to the same network. I frequently connect through a VPN, but NetBIOS resolution fails under that setup. That's why I favor using fixed IP addresses instead.

ScorpiorxX
Junior Member

08-28-2016, 03:30 AM

It might be that the distant computer isn't configured to permit a link unless someone is authenticated.

ScorpiorxX

08-28-2016, 03:30 AM #5

It might be that the distant computer isn't configured to permit a link unless someone is authenticated.

Pyroytic
Member

08-28-2016, 10:13 AM

It seems most folks prefer not to assign fixed IP addresses for everything. I gave up on OP because I had too many to remember, lol.

Pyroytic

08-28-2016, 10:13 AM #6

It seems most folks prefer not to assign fixed IP addresses for everything. I gave up on OP because I had too many to remember, lol.

USAirways
Member

157

09-14-2016, 09:23 PM

I use IP addresses for my VM names, which means I don’t have to memorize them, lucky me!

USAirways

09-14-2016, 09:23 PM #7

I use IP addresses for my VM names, which means I don’t have to memorize them, lucky me!

Cupcake_Rose
Posting Freak

844

10-03-2016, 02:24 AM

Good strategy, I began sharing basic IPs like 192.168.1.1 - 2 - 3, then moved to 10, 100, 101, followed by 50 and 250. Now I’m hitting 46, 48, 36 because I’m running out of options 😅

Cupcake_Rose

10-03-2016, 02:24 AM #8

Good strategy, I began sharing basic IPs like 192.168.1.1 - 2 - 3, then moved to 10, 100, 101, followed by 50 and 250. Now I’m hitting 46, 48, 36 because I’m running out of options 😅

Gladiador70
Senior Member

698

10-05-2016, 12:37 AM

Thanks all!

Gladiador70

10-05-2016, 12:37 AM #9

Thanks all!