Refreshing Profiles for the Latest Gen Support
Refreshing Profiles for the Latest Gen Support
There are four main reasons to upgrade your BIOS: Problems such as RAM not functioning at speed, system rebooting issues, frequent BSODs, and potential CPU damage. A new feature is available in updated BIOS versions, like a resizable BAR. A significant security vulnerability has been identified and fixed, including attacks like Spectre and Meltdown. Compatibility with newer CPUs is essential. If none of these apply to you, avoid updating the BIOS. In most cases, you’ll experience similar performance as before, or worse, encounter problems with the latest release (newer BIOSes don’t always improve things).
I'm not sure what Bsod's are and I haven't noticed any important security patches. I'll check the older versions and read their details. I started updating because of DDR support, but it hasn't been listed for a while. I was expecting all four dimms to run smoothly at high speed, but that didn't happen. The only issue lately is my PC having trouble staying asleep. I think this might be an OS problem. I haven't adjusted any settings. I don't know what caused it. Def not getting Bsod's. I actually had to search for that myself. I was expecting it already. What a total mess.
Blue Screen of Death. Which DIMMs are installed? There are several BIOS updates that support four DIMMs running at fast speeds, but I still wouldn’t suggest using four DIMMs unless you really need them.
I can skip that option. I've only used two to reach the 6400 level. At first I aimed for all four in the 5000s, but I didn’t want to settle for 3600. I purchased two GSKill sequential kits for roughly $270 each, so even though it’s possible, I’d prefer to use them. With the upcoming 9000 model I thought my chances were gone until I upgraded my CPU around 10,000. I assembled this about two years ago, so it’s been a while since I tried. Also, I’m unfamiliar with memory OC settings. I saved a few configuration lists and attempted to tweak speed alone, but nothing worked. As I mentioned, I have no idea what the 50 RAM timing options mean or how they affect things. I believe my current sticks are now in the supported list and functioned well with all four units, though not with XMP profiles. So the $270 price tag has been sitting unused for a while. You’re probably not meant to mix mismatched kits, so I figured the sequential serial numbers might have been a bonus I missed. Ordering them by mail made me think it was unlikely, and ordering them in the wrong order made it even more confusing. I’m also possibly mistaken about any extra advantage. I’m running a 7950x with an X670E Aorus Master and using GSKill f5-6400j3239g32gx2-tz5rk. The Pro is fine, but an EVGA 1000W PSU could have worked if I’d checked the support list again—either it was removed or it was a misinterpretation. It’s still there, but only appears when you leave the capacity field blank. If you pick 32 in the search, it disappears. Odd.
Start with a 5% increase in voltage when using four sticks. If the default is 2.5 volts from the sticker on the RAM stick, set your voltage to 2.625. Many modern tech products can handle this adjustment, though some may only tolerate up to 10%, but I wouldn't suggest going beyond that.
It seems there are several settings that can adjust the refresh rate in RAM configurations. I’d need to check the BIOS to confirm. It’s been a while since I reviewed those options, so I’ll do it after you thank me. Regarding your question, I’m not certain about the exact option without exploring the BIOS, but there should be only one that specifically relates to voltage control.
It seems you're looking for guidance on adjusting your system settings. You might want to lower the speed to 6000MT/s. Going with 6400 could automatically switch to 2:1 mode and hurt performance, so consider setting it to 1:1 and checking stability—most CPUs handle 6400 at around 50%. Check the label on all four sticks; there are two versions (M die and A die), which might explain your issue. The barcode near the barcode will show a code like "S820M" or "S821A"—look at the last character to identify the kit. Upgrading to a newer BIOS could help, as recent versions support more DIMMs. The kit is rated for 1.4V but can work with 1.55V+ if you use a fan. However, with AM5, increasing voltage doesn’t boost frequency; in fact, it often reduces stability, sometimes worsening it.
I didn't notice another reply and I was speaking to two different individuals at once. It seems like I'm dealing with the A variant. Sadly, that number isn't listed on the sticker, so I'm using the PC they're in for this chat. With all four serial numbers being consecutive, it's unlikely I'd have two different variants. They were produced around 2022 as well. That might predate the B version. I'd be very satisfied with 6000 if I could run all four. Anything above 5 should work quickly enough. Unfortunately, the system info shows something like x.x next to the BIOS version, but I think it's from F22 to F24. It appears the group agrees to update the BIOS and try all four on XMP. That might not be effective, so next I'll increase my voltage to 1.55, set the speed to 6000 and hope it works?