Receiving only 50Mbps internet speed via Wi-Fi or Ethernet
Receiving only 50Mbps internet speed via Wi-Fi or Ethernet
You're experiencing inconsistent speeds despite what your devices report. The 800Mbps listed by your router might be based on a theoretical maximum or a different network condition. Your actual connection speed can vary due to factors like distance from the router, interference, or network congestion. Since you're in Australia and using Telstra, 5G isn't available locally, so your speeds are limited by your current internet plan. The second router on 192.168.2.1 likely operates on a different network segment, possibly with its own bandwidth constraints. Band steering differences can also affect performance. Check your connection settings and consider contacting your ISP for further clarification.
The issue is that the router might claim a speed of 800 mbps, but this is likely just the maximum possible. In reality, the actual speed depends on several factors. a) Your ISP usually only provides what you pay for. b) Your router can manage only 50-60mbps, which isn’t necessarily the main problem. c) Other devices might be using the available bandwidth.
Convert speeds using different units: 800 Mbps equals 100 MB/s, and 500 Mbps equals 62.5 MB/s.
The advertised speed shown by your router refers to the connection rate between your device and the router. This isn't the actual internet performance you'll experience. Real internet speed depends on your ISP charges and the type of service you have. Fiber connections to nodes might offer VDSL or DOCSIS Cable options, with U.S. fiber typically capping around 50 to 100 Mbps. DOCSIS Cable can reach over 1 Gbps, and some providers are aiming for 2 Gbps soon.
If you're unsure about your internet speed from your provider, it's best to contact them directly to confirm. After knowing the rates, perform a direct wired test using your modem or router (only if yours comes from your ISP) since service usually stops there and further issues fall under your responsibility.
He explains that if speeds are around 50-50 Mbps, then 6-7 MBps on Steam makes sense, calculating to 6x8 equals 48. Steam measures in Mbps while SpeedTest.net uses Mbps. @BM's point is accurate.