Ready to launch a CPU project.
Ready to launch a CPU project.
You could carefully remove the heat spreader to expose the CPU, then inspect it directly. Alternatively, use a precision tool to gently pry it off for a closer look.
It's referred to as de-lidding. Numerous instructions are accessible on the web. As long as the IHS isn't soldered, you should be able to proceed.
Based on the socket CPU, the specific make of the delidding tools is identified.
Check if the CPU is soldered or has thermal paste between the core and IHS. If thermal paste is present, proceed with delidding using a razor blade. Alternatively, you can employ a wood block and a vice technique.
Sure, you're aiming to remove the lid. If you don't mind the CPU not running and the chip isn't soldered as described, a razorblade and some patience should get you there.
This video is in German, so you might not fully grasp everything. Try watching it with this link: https://www.youtube.com/watch?v=0Hpdz2YaIHQ
It’s because your mind picks up on others’ actions more easily, making them seem clearer or more obvious.