Rated DOCP profile for unstable PC performance
Rated DOCP profile for unstable PC performance
In short, I purchased DDR4 3000 memory for my motherboard because I believed it would run smoothly at its rated speed (2933). However, after setting the docp profile, I’m experiencing crashes in every game I play, while I’m stable at the default speed (2133). Should I try overclocking manually? I have limited experience with overclocking. Any advice would be greatly appreciated. Here are my specs.
1.4ish is the suggested maximum voltage for Ryzen long-term use. DDR4 voltage at 1.4v works too. Some premium builds apply this for XMP. Is the actual SOC listed voltage shown in UEFI? Your 2700X with a 3200 kit uses 1.15 for that SOC. 1.2v is the upper limit here. Have you tried using Memtest86 bootable during XMP to detect issues?
With XMP activated, the SOC voltage is configured as per the settings. You might want to experiment with a slight DRAM voltage adjustment, like moving from 1.35v to 1.375v in the XMP profile, which can help with stability. Regarding VDDCR, it defaults to auto or offset mode; I haven’t changed it yet and haven’t increased it beyond 1.4 for Ryzen models.
1.4ish is the suggested maximum voltage for Ryzen long-term use. DDR4 voltage at 1.4v works too. Some premium builds apply this for XMP. Is the actual SOC voltage shown in UEFI? Your 2700X with a 3200 kit uses 1.15 for that SOC. 1.2v is the upper limit here. Have you tried using Memtest86 bootable during XMP to detect issues?