Random Reboots
Random Reboots
I need even running Expo anymore. 4800 stock. Yesterday I was instructed to test three apps. HWINFO takes about 3-5 minutes; it stabilizes temperatures then runs PRIME95 and furmark for 10-15 minutes, after which it provides a CSV file from HWINFO. You can share it here if you wish. I haven’t received any response yet. I’m unsure how to interpret the file correctly. Regarding the error log, it was critical but possibly related to kernel issues. I’m currently typing on my phone since my PC won’t stay alive long enough for checks. I’ll try anything. As for the new hardware drivers, I installed everything once Windows was set up—most needed drivers were from motherboard sites, AMD for chipset, NVIDIA, and others.
Review the HWINFO log file and HW.CSV output under the given conditions. Ensure consistent activation and persistence each time.
Ensure the EPS and ATX connectors are properly seated before swapping the PSU.
Restarting again while composing this message. I tried it first too. I also considered my zip ties were too snug, so I replaced them. Purchased a cable connecting the PSU to the GPU (4080) but no improvement. The only thing that stands out is the power supply unit—since the system has been running for about eight years, it might have just failed suddenly. It’s not worth buying a new PSU just to be sure. I’m worried about continuing to boot if this is the issue.