Ram wont overclock ?

s3r1na
Junior Member

09-21-2017, 01:39 PM

You've received a new ASROCK TAICHI X370 motherboard. It seems there are some issues with enabling XMP or touching the RAM, causing the CPU to refuse overclocking or triggering a reset. In Windows, only 16 out of 32 GB is showing usable space. Your previous setup with a 2800 stable RAM was functioning well. Could you share more details about the symptoms and any error messages?

s3r1na

09-21-2017, 01:39 PM #1

Malthe581
Member

140

09-21-2017, 10:32 PM

Manual timing hasn't functioned? Are you also tweaking the DRAM voltage?

Malthe581

09-21-2017, 10:32 PM #2

Manual timing hasn't functioned? Are you also tweaking the DRAM voltage?

WitherStarWolf
Member

223

09-23-2017, 08:18 PM

Restart the installation to recover the 32GB storage first.

WitherStarWolf

09-23-2017, 08:18 PM #3

Restart the installation to recover the 32GB storage first.

timberswiss3
Junior Member

09-24-2017, 10:28 PM

It appears the issues are interconnected... it seems to be identifying all RAM sticks... I suspect that could be the root cause. I'll attempt to reinstall the RAM and check the results.

timberswiss3

09-24-2017, 10:28 PM #4

It appears the issues are interconnected... it seems to be identifying all RAM sticks... I suspect that could be the root cause. I'll attempt to reinstall the RAM and check the results.

ILuvJas
Member

144

09-24-2017, 10:49 PM

Replaced the RAM without success... the BIOS seems to be interfering and preventing overclocking, leaving only a fraction functional.

ILuvJas

09-24-2017, 10:49 PM #5

Replaced the RAM without success... the BIOS seems to be interfering and preventing overclocking, leaving only a fraction functional.

Rank_plains
Junior Member

09-25-2017, 05:16 AM

couldn't access the full amount of RAM either. Previously, I had to flash the BIOS, but now I'm using the newest one... the RGB on my RAM indicates it's ready for "High FPS," and all four slots are detected in the BIOS.

Rank_plains

09-25-2017, 05:16 AM #6

TemkaPlay
Member

160

09-28-2017, 11:19 PM

I resolved the issue! A faulty RAM stick was the problem, which should be covered under warranty. Once it was replaced, it displayed 24 GB of RAM and allowed me to reach 3200 MHz.

TemkaPlay

09-28-2017, 11:19 PM #7

I resolved the issue! A faulty RAM stick was the problem, which should be covered under warranty. Once it was replaced, it displayed 24 GB of RAM and allowed me to reach 3200 MHz.