F5F Stay Refreshed Hardware Desktop RAM speed

RAM speed

RAM speed

D
DarkBoy__YT
Posting Freak
898
11-03-2016, 07:41 PM
#1
You're stuck with your Corsair Vengeance RAM running at 2133 MHz despite attempts to change it. The issue might be related to BIOS settings or compatibility limits. Check if your motherboard supports higher frequencies, or consider updating the BIOS if available. If not, you may need a different RAM module that matches your system's requirements.
D
DarkBoy__YT
11-03-2016, 07:41 PM #1

You're stuck with your Corsair Vengeance RAM running at 2133 MHz despite attempts to change it. The issue might be related to BIOS settings or compatibility limits. Check if your motherboard supports higher frequencies, or consider updating the BIOS if available. If not, you may need a different RAM module that matches your system's requirements.

O
Olivier2201
Member
61
11-10-2016, 05:22 PM
#2
Enable XMP within the BIOS settings of your motherboard. This method is also referred to as XAMP for certain AMD systems or DOCP for ASUS-branded boards.
O
Olivier2201
11-10-2016, 05:22 PM #2

Enable XMP within the BIOS settings of your motherboard. This method is also referred to as XAMP for certain AMD systems or DOCP for ASUS-branded boards.

L
Lucmus3
Member
60
11-12-2016, 04:01 PM
#3
However, once I complete it, it still indicates my memory remains at 2133 MHz.
L
Lucmus3
11-12-2016, 04:01 PM #3

However, once I complete it, it still indicates my memory remains at 2133 MHz.

N
natek2015
Member
199
11-14-2016, 06:48 AM
#4
Enable XMP or your motherboard's feature > save and restart > avoid handling the device for a moment (it might reinitialize several times). Is this occurring or is another issue present? Where are you verifying the RAM rate? Which memory type are you using?
N
natek2015
11-14-2016, 06:48 AM #4

Enable XMP or your motherboard's feature > save and restart > avoid handling the device for a moment (it might reinitialize several times). Is this occurring or is another issue present? Where are you verifying the RAM rate? Which memory type are you using?

J
jesus_xus
Member
160
11-14-2016, 08:26 AM
#5
If the RAM is labeled at 2133MHz and that’s its official rate, it will operate only at that frequency no matter what XMP settings are applied. When the module has a higher rating (for example 3000MHz), enabling an XMP profile should automatically adjust it to the correct speed. If not, you can configure it manually. Always verify the specifications to ensure compatibility and performance.
J
jesus_xus
11-14-2016, 08:26 AM #5

If the RAM is labeled at 2133MHz and that’s its official rate, it will operate only at that frequency no matter what XMP settings are applied. When the module has a higher rating (for example 3000MHz), enabling an XMP profile should automatically adjust it to the correct speed. If not, you can configure it manually. Always verify the specifications to ensure compatibility and performance.

F
finnvoor
Junior Member
2
11-14-2016, 12:45 PM
#6
Certain motherboard manufacturers often fail to display memory speed updates in the BIOS, booting into Windows and employing CPU-Z to confirm XMP activation.
F
finnvoor
11-14-2016, 12:45 PM #6

Certain motherboard manufacturers often fail to display memory speed updates in the BIOS, booting into Windows and employing CPU-Z to confirm XMP activation.

D
DoctorMadcow
Member
201
11-18-2016, 01:22 AM
#7
It’s generally listed at 3200 MHz, but once the XMP profile is turned on it fails to boot. After swapping the slots it works, yet it still doesn’t hit the full frequency.
D
DoctorMadcow
11-18-2016, 01:22 AM #7

It’s generally listed at 3200 MHz, but once the XMP profile is turned on it fails to boot. After swapping the slots it works, yet it still doesn’t hit the full frequency.

T
TheMightyElf
Member
214
11-27-2016, 08:55 PM
#8
I’ll attempt that.
T
TheMightyElf
11-27-2016, 08:55 PM #8

I’ll attempt that.

A
Absham
Member
182
11-29-2016, 10:49 AM
#9
It started up correctly. I verified the BIOS, but @gloop suggested checking the CPU Z. It's running Corsair Vengeance RGB Pro 32GB RAM at 3200 MHz.
A
Absham
11-29-2016, 10:49 AM #9

It started up correctly. I verified the BIOS, but @gloop suggested checking the CPU Z. It's running Corsair Vengeance RGB Pro 32GB RAM at 3200 MHz.

B
Blureux
Posting Freak
797
12-05-2016, 11:24 AM
#10
Open the ‘memory’ section in cpu-z and note the reported speed.
B
Blureux
12-05-2016, 11:24 AM #10

Open the ‘memory’ section in cpu-z and note the reported speed.