Ram secured at 2133MHz

miner38
Member

103

08-23-2020, 06:53 PM

motherboard: AsRock B550 M. CPU: Ryzen 5 3600X Graphics: EVGA RTX 3070 RAM: Corsair Vengeance LPX 3200MHz (16-18-18-36). I just added 32GB of RAM (four 8GB modules) with identical connectors, but it’s only reaching 2133MHz. Previously, I had two 8GB modules (16GB total) at 3200MHz and it worked perfectly. I turned on XMP and followed all the instructions in the BIOS. I also upgraded the BIOS to version 2.50, yet nothing changed. I don’t have any videos that match the BIOS I’m using to assist with setup.

miner38

08-23-2020, 06:53 PM #1

DBirdy808
Member

222

08-29-2020, 04:50 PM

I'm checking the settings to verify the lock frequency is set to 2133MHz. You mentioned enabling XMP in the BIOS, but it remains at 3200MHz instead.

DBirdy808

08-29-2020, 04:50 PM #2

I'm checking the settings to verify the lock frequency is set to 2133MHz. You mentioned enabling XMP in the BIOS, but it remains at 3200MHz instead.

JTPaperJam
Member

140

09-13-2020, 08:27 AM

Task manager is working fine. The BIOS still lists 2133 even when XMP is turned on.

JTPaperJam

09-13-2020, 08:27 AM #3

Task manager is working fine. The BIOS still lists 2133 even when XMP is turned on.

Lillmust
Member

153

09-13-2020, 09:48 AM

I’d run CPU-Z to verify the processor speed. The Task Manager might not always recognize the right configuration. Save your changes in the BIOS before restarting.

Lillmust

09-13-2020, 09:48 AM #4

I’d run CPU-Z to verify the processor speed. The Task Manager might not always recognize the right configuration. Save your changes in the BIOS before restarting.

JETzY
Member

174

09-17-2020, 07:20 AM

Positive and affirmative

JETzY

09-17-2020, 07:20 AM #5

Positive and affirmative

Mapley
Member

240

09-24-2020, 12:39 PM

CPU-Z displays the current CPU information and performance metrics.

Mapley

09-24-2020, 12:39 PM #6

CPU-Z displays the current CPU information and performance metrics.

JosephGamez
Member

141

09-24-2020, 04:55 PM

Reset the CMOS and check the results. Use the latest CPU-Z version from the provided link.

JosephGamez

09-24-2020, 04:55 PM #7

Reset the CMOS and check the results. Use the latest CPU-Z version from the provided link.