Ram performance issues when using XMP Profile settings.

F5F Stay Refreshed Hardware Desktop Ram performance issues when using XMP Profile settings.

Redz
Member

118

02-06-2018, 03:13 AM

Manually increase the voltage to 1.360 volts. If it doesn’t succeed, raise it by 0.005 volts at a time. It should be achievable before reaching 1.4 volts.

Redz

02-06-2018, 03:13 AM #1

Manually increase the voltage to 1.360 volts. If it doesn’t succeed, raise it by 0.005 volts at a time. It should be achievable before reaching 1.4 volts.

stevietibbits
Member

02-06-2018, 11:57 AM

This page explains how to configure RAM speed using XMP profiles on Dell XPS laptops.

stevietibbits

02-06-2018, 11:57 AM #2

This page explains how to configure RAM speed using XMP profiles on Dell XPS laptops.

Ramzarn
Junior Member

02-06-2018, 12:35 PM

Thanks for your response. I attempted to increase the voltage manually, but it didn’t help. After reviewing the xmp for dummies guide, I found out in TaskManager that only half of my RAM is available. I plan to follow TrigrH’s advice to see if I can adjust things.

Ramzarn

02-06-2018, 12:35 PM #3

Stachun
Junior Member

02-13-2018, 08:38 PM

I tested each stick individually and they functioned well, but I suspect the dual-channel setting might be malfunctioning now. The issue seems similar to what happened with my older RAM sticks, which also had reduced performance. Everything was working properly before the change. Please let me know if you have any suggestions.

Stachun

02-13-2018, 08:38 PM #4