RAM Overclocking Failure

BlueBaery
Member

229

06-30-2020, 04:42 PM

I purchased a new RAM kit for my PC, specifically the G.skill F3-1600C9D-16GXM. After installation, the system initially ran at 1333MHz but failed to boot after overclocking in BIOS. The error message was: 'The system has experienced boot failure because of overclocking.' I need advice on how to proceed.

BlueBaery

06-30-2020, 04:42 PM #1

ElskerDegMia
Junior Member

06-30-2020, 05:09 PM

Do you possess the most recent BIOS version?
Which expansion slots were used for the RAM installation?
Were the DRAM frequency, timing, and voltage settings configured correctly?

ElskerDegMia

06-30-2020, 05:09 PM #2

Do you possess the most recent BIOS version?
Which expansion slots were used for the RAM installation?
Were the DRAM frequency, timing, and voltage settings configured correctly?

Jensboy12
Member

07-05-2020, 05:32 PM

I have the most recent BIOS update, and the connections are nearest to the CPU slot 2,4 DC.

Jensboy12

07-05-2020, 05:32 PM #3

I have the most recent BIOS update, and the connections are nearest to the CPU slot 2,4 DC.

PoppyHorne
Junior Member

07-06-2020, 06:44 PM

Modules need to be placed in the farthest slots from the CPU. Did you turn on XMP or set the DRAM to 1600?

PoppyHorne

07-06-2020, 06:44 PM #4

Modules need to be placed in the farthest slots from the CPU. Did you turn on XMP or set the DRAM to 1600?

gurfin321
Junior Member

07-09-2020, 07:59 PM

Manually

gurfin321

07-09-2020, 07:59 PM #5

Manually

Pimousse62620
Member

234

07-10-2020, 08:20 AM

Did you attempt one module at a time to determine stability at 1600? Manually checked DDR3-1333 8-8-8-24 1.50V and observed stability.

Pimousse62620

07-10-2020, 08:20 AM #6

Did you attempt one module at a time to determine stability at 1600? Manually checked DDR3-1333 8-8-8-24 1.50V and observed stability.