RAM overclock crashes PC?
RAM overclock crashes PC?
My RAM is labeled as 2400MHz DDR4, but the packaging states 2400MHz as well, yet it defaults to 2133MHz. Every attempt to boost it to 2400MHz causes crashes before I can even open Windows. It seems there might be an issue, though the Mobo BIOS shows a change from DDR4-2133MHz to DDR4-2400MHz. Interestingly, this RAM is also marketed for overclocking, claiming it supports high-performance overclocking, but in reality it only allows low-performance underclocking and doesn’t run at stock speeds. Please help.
I figured out the issue, but I kept making the same error—forgetting to adjust a setting in the BIOS (like D.O.C.P) and only changing the clock speed. It seems enabling XMP on an Intel motherboard’s memory would unlock its full rated speed (my setup has 1866 DDR3, but without XMP enabled in BIOS it only runs at 1600). I checked the manual under the memory section but didn’t find any instructions for a similar setting. That was my initial thought, though I assumed AMD didn’t require it on Ryzen since I didn’t see it or think it was necessary.
Have the BIOS been refreshed? Users with version 0502 were unable to exceed 2133MHz. Note that some Ryzen motherboard suppliers are still experiencing "teething" problems when updating their boards to support higher memory speeds beyond the rated limits, particularly for those using memory faster than 2667MHz.
10tacle :
Check if you've updated the BIOS. Users with version 0502 were limited to 2133MHz. Some Ryzen motherboard makers are still facing "teething" problems when updating boards to support higher memory speeds than rated. This is particularly true for those using memory faster than 2667MHz.
I haven't tried it yet; I thought my BIOS was up-to-date since the board arrived just a week ago. I searched for drivers on the Asus site but couldn't find any. Other posts suggest avoiding driver updates unless you're encountering Windows installation issues. I'm unsure what to do next—did I miss something in the BIOS settings? I only changed the memory speed there.
I haven't tried that yet; I thought my BIOS wouldn't be outdated given the new motherboard, and it's only been a week. That doesn't give any certainty. You might have received older BIOS versions in stock. The safest approach is to check during startup—look at the ASUS splash screen to see what revision appears.
10tacle :
STIHL :
I haven’t tested that yet; I thought my BIOS wouldn’t be that old since I just got a new motherboard, and it’s only been a week. That doesn’t mean anything. You might have gotten older BIOS versions in stock. The safest way is to check during startup—look at the ASUS splash screen to see what revision appears.
STIHL :
I searched for drivers on the Asus site but couldn’t find any. Other users suggest avoiding driver updates unless you’re facing installation problems with Windows. I’m unsure what to do next. Was there a missed step in the BIOS settings? I only changed the memory speed, not much else. Drivers and BIOS are different things. Upgrading the BIOS is sometimes necessary depending on your problem. First, identify the BIOS you’re using. If it’s one of the latest versions, then check the memory specifications. Where did you purchase the components? Some sellers might mislabel memory as slower than it really is.
Lost__Execute :
Don’t overclock your RAM, it’s not worth it.
He isn’t trying to overclock it; he just wants it to run at its rated speed. Still, pushing memory beyond its limits can lead to more issues than benefits—ranging from BSODs to data corruption and registry damage.
I bought both parts from Amazon, so I’m not concerned about shady dealers. Updating the BIOS seems complicated, and I don’t want to risk missing a step. I’m confident enough with computers to handle updates or backups on Windows, but BIOS updates are a different story. I’m wondering if it’s really worth it, especially since my RAM speeds seem lower than advertised—maybe it’s a mistake from Corsair.
STIHL:
I obtained both the parts from Amazon, so I assume nothing suspicious. How should I update the BIOS? It seems quite complicated and I don’t want to make any mistakes by skipping a step. I think I’m capable enough with computers to install updates or reset/backup on Windows, but when it comes to the BIOS I’m not very confident. Is this worth doing, given that my RAM speeds are slower than advertised? It feels like a bit of a mistake from Corsair.
First, check your current BIOS version. Have you done that already?
10tacle :
STIHL :
I obtained both the parts from Amazon, so I assume nothing is hidden. How should I update the BIOS? It seems quite complicated and I don’t want to make a mistake by skipping a step. I think I’m capable of handling computers to install updates or reset/backup on Windows, but BIOS feels different. Is it worth doing this, given that my RAM speeds are slower than expected? It might be a bit of a mistake from Corsair.
First, check your current BIOS version. Have you done that already?
I managed to sort it out—I made an error by not changing a setting in the BIOS (like D.O.C.P) or just adjusting the clock speed.
I handled the situation by correcting a setting in the BIOS (D.O.C.P or similar) instead of just adjusting the clock speed. It seems enabling XMP on an Intel motherboard's memory would allow it to use its full rated speed (my setup has 1866 DDR3, but without XMP enabled in BIOS it only runs at 1600). I checked the manual under the memory section but didn’t find a similar setting. That was my initial thought, though I assumed AMD didn’t require it on Ryzen boards since it wasn’t visible there. Overall, I’m relieved it worked. Others reading this might want to note that different manufacturers use different terms for XMP.