Ram locked at 2133 MHz?
Ram locked at 2133 MHz?
Adjust the settings to 3200 and run memtest86 for stability checks. (Alternatively, consider using OCCT.)
Mostly just follow the guidelines. As mentioned, start with version 1.15, use DRM 1.35, then move to 2666, increasing to 3200 and 3600. Observe the limits you reach.
Adjust the VSOC to 1.15, then set DRAM to 1.35. Try configuring 2666 with XMP activated and observe the limits. Progress gradually to 3200 and 3600.
Not used to their UEFI, unfortunately. For the voltage settings, check the RAM section or whatever they refer to. Regarding VSOC, it might be under the CPU as well. As I mentioned, I’m not familiar with it. You could search through the documentation.
Navigate to the advanced settings and proceed to DRAM voltage, which is lower than the SoC voltage.