Ram issue, I’m not sure. Would like some help

F5F Stay Refreshed Hardware Desktop Ram issue, I’m not sure. Would like some help

12-31-2018, 04:35 AM

I received an ASUS Prime Z390-A board that accommodates up to 64GB RAM with four slots. I recently added more RAM using Corsair Vengeance RGB Pro, which provides 4x16GB (total 64GB). After installing the new RAM, my PC started and booted, but after a couple of seconds it would shut down and restart. Around three times this happened, I ended up accessing the BIOS screen. To verify, I removed two RAM slots and left the other two, which allowed the system to boot normally again. The BIOS indicated support for the amount of RAM installed. Despite this, the PC would loop back into the BIOS interface. I’m still confused about why it keeps going through that process even though the specs say it should work. Could be a hardware issue or something with the motherboard configuration. Thanks for your guidance!

killerbeast21

12-31-2018, 04:35 AM #1

Navy_Nuke_Yui
Member

12-31-2018, 08:02 AM

Navy_Nuke_Yui

12-31-2018, 08:02 AM #2

FR0Zos
Member

01-02-2019, 06:41 AM

Thanks for your prompt reply. Bios seems current. I just tested slots 1 and 3, and it’s triggering a PC loop reboot. Likely the issue is with those slots.

FR0Zos

01-02-2019, 06:41 AM #3

Thanks for your prompt reply. Bios seems current. I just tested slots 1 and 3, and it’s triggering a PC loop reboot. Likely the issue is with those slots.