RAM fails to operate at the claimed 3200MHz frequency.

Pages (2): 1 2 Next

LordMinerBR
Junior Member

08-08-2018, 07:00 PM

You've recently acquired a Ryzen 5 2600x system paired with an ROG Strix B450-F motherboard and 16GB Corsair Vengeance RAM. Despite enabling the default DOCP (XMP) profile which correctly sets timings and voltage, your RAM isn't reaching the advertised 3200MHz. The maximum you've achieved is 2800MHz. The RAM timings are listed as 16-18-18-36. You've adjusted the voltage to 1.35V, 1.4V, and even the board's chipset voltage to 1.1V without success. After updating the motherboard BIOS, you're still facing this issue. Could someone provide guidance on resolving this?

LordMinerBR

08-08-2018, 07:00 PM #1

Zai_Zai_V5
Junior Member

08-10-2018, 12:50 PM

Switch Ai overclocktuner to manual mode instead of DOCP. Navigate to the "Tool" tab, select SPD, and review the timings. Return to Ai tweaker, adjust frequency to 3200mhz, set voltage to 1.35v, and configure timings manually based on SPD guidelines.

Zai_Zai_V5

08-10-2018, 12:50 PM #2

artemis0
Member

08-10-2018, 01:23 PM

These adjustments have already been made by DOCP, but I'm giving it a shot!

artemis0

08-10-2018, 01:23 PM #3

These adjustments have already been made by DOCP, but I'm giving it a shot!

Noob_Thiago23
Member

08-15-2018, 12:43 PM

No, I don't have a RAM in slots 2 and 4.

Noob_Thiago23

08-15-2018, 12:43 PM #4

No, I don't have a RAM in slots 2 and 4.

Ks34_MisteR
Member

245

08-16-2018, 12:10 AM

Ensure you're using the most recent bios. Performance isn't assured if your memory kit isn't the QVL version.

Ks34_MisteR

08-16-2018, 12:10 AM #5

Ensure you're using the most recent bios. Performance isn't assured if your memory kit isn't the QVL version.

Silvinha10
Senior Member

694

08-16-2018, 01:44 AM

This and that BIOS. However, 3200mhz isn't that significant, right?

Silvinha10

08-16-2018, 01:44 AM #6

This and that BIOS. However, 3200mhz isn't that significant, right?

Cow_Boi
Member

153

08-16-2018, 02:16 AM

it is for a shit 3200 kit thats only validated on intel ( 16-18-18-36) is the cheap stuff.

Cow_Boi

08-16-2018, 02:16 AM #7

it is for a shit 3200 kit thats only validated on intel ( 16-18-18-36) is the cheap stuff.

Lizzy16
Member

179

08-18-2018, 12:17 AM

3200 - Op could focus on configuring main timings: 16-18-18-36, 1.35v, with the rest operating automatically.

Lizzy16

08-18-2018, 12:17 AM #8

3200 - Op could focus on configuring main timings: 16-18-18-36, 1.35v, with the rest operating automatically.

zNoouz_
Senior Member

259

08-27-2018, 10:21 AM

They're placed in slots 1 and 3, does it really matter? I'll swap them later. Thanks for confirming the latest BIOS!

zNoouz_

08-27-2018, 10:21 AM #9

They're placed in slots 1 and 3, does it really matter? I'll swap them later. Thanks for confirming the latest BIOS!

Turtuls
Member

08-27-2018, 05:54 PM

#10

Motherboards favor specific channels. They often check the preferred one first; if nothing is there, they skip to the next channel.

Turtuls

08-27-2018, 05:54 PM #10

Motherboards favor specific channels. They often check the preferred one first; if nothing is there, they skip to the next channel.

Pages (2): 1 2 Next