F5F Stay Refreshed Hardware Desktop RAM compatibility

RAM compatibility

RAM compatibility

E
Evolution88
Member
216
07-12-2016, 06:03 AM
#1
Hello, your systems are quite different. You have two 8GB DDR4 RAM modules with specific speeds (Aegis at 3000MHz and HyperX at 3200MHz). They’re both compatible in terms of speed and type, but you can only install up to two modules per case due to memory controller limitations. Adding a third would exceed the maximum supported configuration. Your fourth module won’t fit either. You could use one of each speed if needed, but not more than two at once.
E
Evolution88
07-12-2016, 06:03 AM #1

Hello, your systems are quite different. You have two 8GB DDR4 RAM modules with specific speeds (Aegis at 3000MHz and HyperX at 3200MHz). They’re both compatible in terms of speed and type, but you can only install up to two modules per case due to memory controller limitations. Adding a third would exceed the maximum supported configuration. Your fourth module won’t fit either. You could use one of each speed if needed, but not more than two at once.

C
clay__
Member
159
07-20-2016, 02:39 PM
#2
It’s probable it will function, but you’ll probably need to adjust the speed or latency manually, choosing the lower one.
C
clay__
07-20-2016, 02:39 PM #2

It’s probable it will function, but you’ll probably need to adjust the speed or latency manually, choosing the lower one.

S
subgold
Member
51
07-20-2016, 03:14 PM
#3
Transitioned to CPU designs, motherboard configurations, and memory systems.
S
subgold
07-20-2016, 03:14 PM #3

Transitioned to CPU designs, motherboard configurations, and memory systems.