Ram chooses not to go fast because it doesn't feel like the right move.

F5F Stay Refreshed Hardware Desktop Ram chooses not to go fast because it doesn't feel like the right move.

MineFloYT
Member

190

04-12-2022, 08:42 PM

Acquired a 5800x3D card to pair with my 3090 and upgraded to an x570 board. The CPU supports 3600Mhz and should boot at those speeds, but it keeps crashing every other reboot, resetting to 2666Mhz. Corsair’s revenge is in action. I have two 2x8GB SSDs available. Any advice would be greatly appreciated.

MineFloYT

04-12-2022, 08:42 PM #1

Mario10Gamer
Member

188

04-13-2022, 05:39 AM

Hello, I'm not sure if Corsair Vengeance models have the same problems, but I've heard many older versions of Corsair Vengeance LPX face issues with Ryzen processors.

Mario10Gamer

04-13-2022, 05:39 AM #2

Hello, I'm not sure if Corsair Vengeance models have the same problems, but I've heard many older versions of Corsair Vengeance LPX face issues with Ryzen processors.

ADIR_4444
Senior Member

417

04-13-2022, 10:34 AM

Using four sticks limits the AMD speed to 3200MHz. Many chips support 3600MHz, but your chip might have a slow memory controller. Test at 3200MHz to check if the problem continues.

ADIR_4444

04-13-2022, 10:34 AM #3

Using four sticks limits the AMD speed to 3200MHz. Many chips support 3600MHz, but your chip might have a slow memory controller. Test at 3200MHz to check if the problem continues.

ketman34
Posting Freak

834

04-13-2022, 11:16 AM

I'll attempt that once I'm back. When I opened cpu-z, there was one stick running at XMP speeds while the others were significantly slower, which felt unusual to me.

ketman34

04-13-2022, 11:16 AM #4

I'll attempt that once I'm back. When I opened cpu-z, there was one stick running at XMP speeds while the others were significantly slower, which felt unusual to me.